BEHR PREMIUM® Solid Color Concrete Stain
A durable solid color stain designed to help protect and enhance both exterior and interior, vertical and horizontal concrete surfaces. This Siliconized 100% Acrylic formula is designed to provide a long-lasting durable finish.
Click Here to see available colors.
Finish
Flat finish
Best For Use In
Interior & Exterior concrete and masonry surfaces
Coverage
Rough: 400-500 Sq. Ft per ; Smooth; 500-600 Sq. Ft. per Gallon
PRODUCT USAGE
-
Rough Surface
400-500 Sq. Ft
Smooth Surface
500-600 Sq. Ft. -
2 HR Dry To Touch
2-4 HR Recoat Time -
Soap & Water
Clean-Up -
Protect
from Freezing
Properly prepared Interior or Exterior surfaces such as: Concrete, Masonry Walls, Basements, Patios, Sidewalks, Driveways*, Garage Floors*, Tennis Courts, Cement Blocks, Pillars and Brick. Not for use on surfaces subject to hydrostatic pressure.
- * Driveways and Garage Floors - Lack of proper surface preparation and/ or over-application can lead to automobile tires lifting the product from the surface.
- CAUTION: Stained surfaces may become slippery when wet. Use caution when walking on surface when moisture is present. Use a product such as BEHR PREMIUM® NON-SKID NO. 970 to help prevent slipping.
New and Uncoated Concrete or Masonry Surfaces:
- New concrete must cure for a minimum of 30 days.
- For proper penetration and adhesion of topcoat, use a concrete & masonry cleaner and etcher to clean and etch the surface. Remove mildew stains with a mildew stain removing product. Follow all label instructions.
- Apply a product such as BEHR PREMIUM Concrete & Masonry Bonding Primer No. 880 to increase adhesion of topcoat to the surface. Follow all label instructions.
Painted, Stained or Sealed Concrete:
- Option 1- To completely strip the entire surface, use a concrete & masonry paint stripper product.
- Option 2- To recoat over an existing coating, remove any loose or peeling paint and scuff sand the surface.
- Clean previously coated surfaces in sound condition.
- Clean and etch any bare concrete surface.
- Spot prime all uncoated areas with a product such as BEHR PREMIUM Concrete & Masonry Bonding Primer No. 880 to increase adhesion of topcoat to the surface. Follow all label instructions.
Read More
Application
- DO NOT THIN. Intermix all cans of same product to ensure color uniformity. Stir stain before and occasionally during application.
- Use product when air and surface temperatures are between 50-90°F (10-32°C).
- Apply a thin, even coat using a 1/4"-3/8" nap roller cover, pad applicator or a nylon/polyester brush at a spread rate of 400-600 sq. ft. (37-56 m2) per gallon. Use long, even strokes in one direction to avoid lap lines.
- Since concrete varies in texture/porosity, two coats may be required for uniform color appearance. Apply a second coat (in a criss-cross direction) if uniformity is needed. Recoat after 2-4 hours. Periodic touch-ups may be necessary.
Read More
Dry Time
- Longer dry time required in cooler temperatures and in higher humidity.
- Allow 24 hours for light foot traffic.
- Park tires on corrugated cardboard for 14 days after applying stain. After two weeks, dry stained surface may be cleaned with a mild, non-abrasive liquid detergent.
Read More
Disposal
- To recycle or properly dispose of product in your community, contact your household refuse collection service.
Read More
Read More
Reviews
How-To
Find step-by-step instructions in our how-to articles and videos.
WARRANTY
LIMITED WARRANTY: For one year from the date of purchase, Behr Paint Company warrants to the original consumer purchaser, (1) that the product meets Behr Paint Company manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
