BEHR MARQUEE® Interior Semi-Gloss Enamel

Average Rating:
false

BEHR MARQUEE Stain-Blocking Paint & Primer Interior Semi-Gloss Enamel is our most advanced interior paint - delivering high-performance one-coat coverage with every color in the exclusive MARQUEE Interior One-Coat Color Collection. Expressing yourself with exactly the colors you want has never been easier. The MARQUEE Interior One-Coat Color Collection offers an extensive palette of colors in both classic and contemporary hues. It's the combination of MARQUEE Interior Paint & Primer and MARQUEE colors that delivers beautiful one-coat colors. Guaranteed.* Learn More.

Finish
A Semi-Gloss paint has a sleek, radiant sheen that resists mildew, moisture and wear.
Best for use in
Ideal for Every Room
Coverage
Up to 400 Sq. Ft per Gallon

Read important application instructions to ensure optimum paint performance.

Find Your Perfect Color!

Find, Coordinate & Preview Paint Colors

Explore our color library. Browse our collections of popular and trending colors.  Find coordinating colors then preview them in your own virtual room image. Do it all with ColorSmart by BEHR®.

Explore Color Now

Sold Exclusively at
The Home Depot

Find a Home Depot store near you.

Product Usage

1 HR Dry Time
2 HR
Recoat Time

Up to 400 Sq. Ft.

Coverage per

Gallon

Protect
from Freezing

Soap & Water
Clean-Up

Where to Use

Properly prepared coated interior surfaces. Ideal for every room.

Usage Summary
Preparation & Prime

All Surfaces:

  • Properly prepare and clean all surfaces.
  • Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry. Remove mildew stains with a mildew stain remover.
  • Scuff sand glossy surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.
  • Use BEHR MARQUEE paint as a primer for uncoated, porous or repaired interior surfaces, including woods that contain tannins (two primer coats required for redwood and cedar).

Stained Surfaces:

  • Lock in stains with BEHR MARQUEE as a spot primer.
  • For heavy stains, test for stain bleed-through by applying BEHR MARQUEE to a small section.
  • If the stain bleeds through, spot prime with another coat to the stained area and test again before topcoating.
  • If bleeding continues, a longer dry time is needed before topcoating.
Application
  • Apply when air and surface temperatures are between 50-90°F (10-32°C).
  • Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
  • Use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015 - .019" spray tip, 60 mesh filter).
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
  • Fully saturate roller for best coverage.
  • Untinted ULTRA PURE WHITE® and colors outside of the MARQUEE Interior One-Coat Color Collection may require more than one coat to achieve complete hide and a uniform finish.
  • Darker colors may require additional dry time between coats. Cooler temperatures or higher humidity may prolong drying time.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant.
  • Do not use on floors.
Disposal
  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Read Application Instructions

LIFETIME LIMITED WARRANTY

Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey:  The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read Warranty Information

BEHR MARQUEE® Interior Semi-Gloss Enamel is rated 4.8 out of 5 by 246.
Rated 5 out of 5 by from So easy to paint with! This has been the best paint we have ever bought. It made painting fun again because we paint quickly. There were minimal drips and the coverage was outstanding.
Date published: 2018-12-11
  • y_2019, m_3, d_20, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_246
  • loc_en_US, sid_1010101003450-I, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_behr
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 260ms
  • REVIEWS, PRODUCT

How-To

Find step-by step instructions in our how-to articles and videos.