1 gal can of Premium Plus Interior Semi-Gloss Paint

PREMIUM PLUS^® Interior Semi-Gloss Enamel

Avg. Rating:

For a paint that's tough enough to tackle any room in your home without sacrificing beauty, choose BEHR PREMIUM PLUS® Interior Semi-Gloss Enamel paint. This sleek sheen resists mildew and wear, so it's great for bathrooms and kitchens, and its radiant appearance makes it great for adding color to cabinets, trim and indoor furniture.

Finish: A semi-gloss paint has a sleek, radiant sheen that resists mildew, moisture and wear.
Best for use in: Cabinets and trim; high-traffic, high-moisture areas.
Coverage: 250-400 Sq. Ft. per Gallon

Read important application instructions to ensure optimum paint performance.

Find Your Perfect Color!

Find, Coordinate & Preview Paint Colors

Explore our color library. Browse our collections of popular and trending colors. Find coordinating colors then preview them in your own virtual room image. Do it all with ColorSmart by BEHR^®.

Explore Color Now

Sold Exclusively at
The Home Depot

Find a Home Depot store near you.

Light blue and light green brush strokes

Product Usage

1 HR Dry Time
2 HR Recoat Time

250-400 Sq. Ft
Coverage per Gallon

Soap & Water
Clean-Up

Protect
from Freezing

Where to UseBlank space if empty.

For high traffic/high moisture areas. Ideal for Kids’ Rooms, Hallways, Kitchens, Bathrooms, Doors, Windows, Trim, Cabinets, Shutters and Interior Furniture.

Usage SummaryBlank space if empty.

PreparationBlank space if empty.

All surfaces should be properly prepared and cleaned.
Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry.
Remove mildew stains with a mildew stain removing product.
Scuff sand glossy surfaces and repair imperfections.
Remove all dust with a damp cloth, allow to dry. Allow new stucco, plaster and masonry to cure for 30 days before painting.
Allow new stucco, plaster and masonry to cure for 30 days before painting.

Prime†Blank space if empty.

Use BEHR PREMIUM PLUS® Paint as a primer over properly prepared coated or uncoated surfaces.
For stain-blocking, or over oil-based or glossy surfaces, use a product such as BEHR PREMIUM PLUS All-In-One Primer & Sealer No. 75.
For optimal color development, better hide, and to reduce the number of topcoats with deep colors denoted with a dagger (†) on the color chip, apply a custom tinted primer coat of BEHR PREMIUM PLUS Paint.
Prime all metal surfaces before painting.

ApplicationBlank space if empty.

Apply when air and surface temperatures are between 50-90°F (10-32°C).
Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
Use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or airless sprayer (.015-.019" spray tip, 60 mesh filter).
Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
Certain colors may require additional coats for complete hide.
Darker colors may require additional dry time between coats.
Cooler temperatures or higher humidity may prolong drying time.
After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
Dry paint film is mildew resistant.
Do not use on floors.

DisposalBlank space if empty.

For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Blank space if empty for ADABlank space if empty.

To consult with a Behr Certified Coatings Professional, call 1-800-854-0133 Ext. 2 (U.S.A. only).

Read Application Instructions

LIFETIME LIMITED WARRANTY

Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read Warranty Information

Download Info Sheet

Tools & Resources

MSDS & Data Sheet

PREMIUM PLUS® Interior Semi-Gloss Enamel is rated 4.7 out of 5 by 829.

Rated 5 out of 5 by dtjacobson from The best latex semi-gloss paint around I've used Behr Premium Plus Interior Semi-Gloss Enamel in kitchens and on wood millwork (baseboards; wainscoting; doors; doorway trim) for the last 25 years, and refuse to use anything else. It goes on smoothly, cleans up easily, and once it has cured, is hardwearing and easy to clean.

Date published: 2019-05-23