BEHR^® Masonry, Stucco & Brick Paint - Satin

Where to UseBlank space if empty.

Properly prepared Interior or Exterior vertical surfaces such as: Stucco, Masonry, Concrete, Concrete Block and Brick as well as adjacent Wood and Metal. Not for use on horizontal surfaces subject to foot traffic.

Usage SummaryBlank space if empty.

PreparationBlank space if empty.

Proper surface preparation is required.

• Allow new stucco and masonry to cure for 30 days before painting.
• Remove all loose, peeling paint. Powerwash to remove chalk. Remove dirt and grease with a product such as BEHR PREMIUM® NO. 990 Concrete & Masonry Degreaser & Cleaner.
• Remove mildew stains with a mildew stain removing product.
• On galvanized metal, use a diluted solution of a product such as BEHR PREMIUM NO. 991 Concrete & Masonry Cleaner & Etcher to prepare the surface. Follow all label instructions. Rinse thoroughly and allow a minimum of 24 hours to dry.
• Cracks and gaps wider than 1/16" (1.5 mm) should be routed open, dusted and patched with a quality patching compound. Use an acrylic caulk around windows, doors and trim. Scuff sand glossy surfaces.
• If chalk remains on the surface, prime with a product such as BEHR PREMIUM PLUS® NO. 436 Exterior Multi-Surface Primer & Sealer.
• Prime all patched areas as well as adjacent wood and metal surfaces.
• If previously sealed or coated, check manufacturer's specifications before painting.

ApplicationBlank space if empty.

• DO NOT THIN.
• Intermix all cans of same product to ensure color uniformity. Stir paint before and occasionally during application.
• Use product when air and surface temperature are 50-90˚F (10-32˚C). Do not use if rain or heavy dew is expected within 24 hours.
• Apply using a high quality 3/4"-1" nap roller, nylon/polyester brush or airless sprayer (.015"-.017" spray tip).
• Apply a second coat, if necessary. Maintain a wet edge to avoid lap marks.
• Do not re-spread or re-work paint.

Dry TimeBlank space if empty.

• Longer dry time required in cooler temperatures and higher humidity.
• After two weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.

DisposalBlank space if empty.

• Properly dispose of all soiled rags.
• For disposal of empty containers and unused product contact your household refuse collection service.