BEHR PREMIUM
Extra Textured DECKOVER®

Average Rating:
false

Bring new life to old wood and concrete surfaces with BEHR PREMIUM EXTRA TEXTURED DECKOVER. This 100% acrylic formula conceals cracks and splinters up to 1/4", and creates a heavily textured, slip-resistant finish that provides waterproofing protection. It's available in 54 solid custom colors, and is also great for decks, railings, patios, composite decks, pool decks and walkways.

 

View DeckOver Colors.

 

Finish
Creates a textured, slip-resistant finish
Best for use in
For properly prepared exterior weathered or cracked horizontal and vertical wood, concrete and composite surfaces.
Coverage
1st Coat 75 Sq. Ft; 2nd Coat 75 Sq. Ft.

Read important application instructions to ensure optimum paint performance.

Find Your Perfect Color!

Find, Coordinate & Preview Paint Colors

Explore our color library. Browse our collections of popular and trending colors.  Find coordinating colors then preview them in your own virtual room image. Do it all with ColorSmart by BEHR®.

Explore Color Now

Sold Exclusively at
The Home Depot

Find a Home Depot store near you.

Product Usage

Must Prep

Before Use

2 Coats Required

Horiz. Spread Rate:
1st Coat 75 Sq. Ft
2nd Coat 75 Sq. Ft.

 

Clean-Up
Soap & Water

Where to Use

Recommended for properly prepared interior and exterior weathered or cracked horizontal and vertical wood and composite surfaces such as Decks, Railings, Porches and Boat Docks. Also great for concrete surfaces such as Pool Decks, Patios and Sidewalks. Do not use on drivable surfaces such as garage floors.

 

Usage Summary
Surface Preparation†

Proper surface preparation is required.

  • All surfaces must be clean, sound, dry and free of any dirt, oil and grease before application.

 

WOOD SURFACES:

  • Replace rotting or splitting boards and remove loose splinters.
  • To remove failing coatings or to remove loose wood fibers, use a product such as BEHR PREMIUM® No. 64 Wood Stain & Finish Stripper followed by BEHR PREMIUM No. 63 All-In-One Wood Cleaner to neutralize the wood. 
  • When stripping is not needed, the surface MUST be prepared with a product such as No. 63 Wood Cleaner to remove mill glaze and clean the wood surface. 
  • After using either No. 64 or No. 63, rinse thoroughly with a garden hose or pressure washer. When rinsing with a pressure washer, use the broadest spray pattern while keeping the nozzle at least 24" away from the surface. 
  • Allow the area to dry at least 24 hours before coating. 
  • If needed, lightly sand to remove any wood fibers/fuzz. 

 

CONCRETE SURFACES:

  • Avoid areas that are structurally weak or subject to hydrostatic pressure above 8 psi. 
  • Allow new surfaces to cure for 30 days. 
  • Clean and etch surface using a product such as a muriatic acid etcher to achieve a textured profile similar to 150 grit sandpaper. 
  • If the previous coating is failing or peeling, use a paint stripper to remove old coating.
Application
  • Use product when air and surface temperatures are between 50-90˚ F (10-32˚ C). 
  • Avoid applying in direct sunlight or to hot surfaces. 
  • Do not use if rain is expected within 24 hours. 
  • The surface must be completely dry before application. 
  • Avoid painting if humidity is expected to be greater than 80%. 
  • Intermix multiple containers to ensure color uniformity. 
  • Stir product occasionally throughout application.  May thin with up to 8 oz. of clean water per gallon.
  • For nail holes and cracks up to 1/4", completely fill in with Extra Textured DECKOVER® coating using a nylon/polyester brush and allow to dry prior to rolling. 
  • Deep nail holes and cracks may require additional filling. 
  • For edges, corners and in between wood boards, apply using a nylon/polyester brush. 
  • Use pressure while rolling and apply a generous, even coat using the DECKOVER Extra Textured Roller Cover. 
  • For vertical surfaces such as railings, use a nylon/polyester brush or roller and apply two thin coats at a spread rate of 400 sq. ft. per gallon. 
  • Do not use with airless sprayer. 
  • For optimum performance, film uniformity, leveling and to cover cracks, a second coat MUST be applied. 
  • Maintain a wet edge when applying.
Dry Time
  • 4-6 hours before recoat. 
  • Dries to touch in 4 hours. 
  • Wait 24-48 hours before light foot traffic. 72 hours to full cure. Additional dry time may be needed in cooler temperatures and higher humidity. 
  • Premature heavy traffic will cause coating failure.

 

Disposal
  • For disposal of empty containers and unused product contact your household refuse collection service.

Read Application Instructions

LIMITED WARRANTY

For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. In the event this product proves to be defective within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read Warranty Information

BEHR PREMIUM Extra Textured DECKOVER® is rated 3.8 out of 5 by 29.
Rated 5 out of 5 by from Worth It Our deck was built in 2001 and hasn't really been taken care of properly. It had peeling paint, bare spots, and so many cracks i couldn't count them. I prepped the deck per the instructions using the Behr products. The only thing I found was, because of all the cracks, I couldn't use the roller for the first coat, I actually brushed it on. I rolled the second coat, but the roller sleeve kept sliding off the roller; my roller is old. This job took a lot of time and effort, but boy was it worth it. All I can say is WOW; this deck looks new.
Date published: 2018-07-15
  • y_2019, m_3, d_24, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_29
  • loc_en_US, sid_5015, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_behr
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 21ms
  • REVIEWS, PRODUCT

How-To

Find step-by step instructions in our how-to articles and videos.