BEHR PREMIUM® QUICK DRY Oil Base Wood Finish

Average Rating:
false

BEHR PREMIUM QUICK DRY Oil Base Wood Finish is a revolutionary, breakthrough product that allows you to Prep, Stain and Entertain™ All In the Same Day.  This unique wood finish can be applied to damp wood and dries dramatically faster than traditional oil wood finishes.  It quickly penetrates the wood surface and provides early rain resistance.

Finish
Unique wood finish that quickly penetrates the wood surface and provides early rain resistance. Available in Clear, Cedar Naturaltone, Redwood, Chocolate and Cordovan Brown.
Best for use in
Recommended for properly prepared new to slightly weathered, unsealed exterior wood surfaces (0-5 years exposure) such as: Decks, Railings, Shakes, Shingles, Siding, Fences, and Wood Patio Furniture.
Coverage
Up to 300 Sq.Ft. per Gallon

Read important application instructions to ensure optimum paint performance.

Find Your Perfect Color!

Find, Coordinate & Preview Paint Colors

Explore our color library. Browse our collections of popular and trending colors.  Find coordinating colors then preview them in your own virtual room image. Do it all with ColorSmart by BEHR®.

Explore Color Now

Sold Exclusively at
The Home Depot

Find a Home Depot store near you.

Product Usage

Must Prep

Before Applying

Wood Stain

1 Coat

Application

Spread Rate

Covers up to

300 Sq. Ft.

Clean-Up

Mineral Spirits

or Paint Thinner

Where to Use

Recommended for properly prepared new to slightly weathered, unsealed exterior wood surfaces
(0-5 years exposure) such as: Decks, Railings, Shakes, Shingles, Siding, Fences, and Wood Patio Furniture.

Usage Summary
Surface Preparation†

Proper surface preparation is required.

  • For failing coatings or to remove loose wood fibers, use a product such as BEHR PREMIUM® No. 64 Wood Stain & Finish Stripper followed by BEHR PREMIUM No. 63 All-In-One Wood Cleaner to neutralize the wood.
  • When No. 64 is not needed, a product such as No. 63 MUST be used to remove mill glaze and clean the wood surface.
  • After using either No. 64 or No. 63, rinse thoroughly with a garden hose or pressure washer. When rinsing with a pressure washer, use the broadest spray pattern while keeping the nozzle at least 24" away from the surface.
  • Remove any standing water and allow the area to dry to under 20% moisture content (approximately 1-3 hours of dry time under normal conditions) before coating. If any sanding is required to remove wood fibers/fuzz, allow the surface to dry completely.
  • Protect all surrounding areas not intended to be stained including vegetation, windows, concrete, etc.
Application

For best results, a lambswool pad applicator is recommended over large deck areas.

  • Shake product thoroughly prior to opening.
  • Must apply between 40-90˚F (4.5-32˚C).
  • Avoid applying in direct sunlight or to hot surfaces.
  • Coating will resist rain after approximately 1 hour.
  • Product may be applied to damp wood surfaces (i.e. within 1-3 hours of rainfall, rinsing, and removal of any standing water).
  • Use caution when pouring product as some splashing may occur.
  • Immediately clean up any inadvertent spills with mineral spirits or paint thinner.
  • For multiple gallons, combine into larger container for color uniformity.
  • Mix product occasionally throughout application.
  • Test product for penetration and color on a small hidden area before proceeding.
  • Use a natural bristle brush for areas requiring more accuracy. Use of rollers is not recommended.
  • A high quality pump sprayer with a variable tip may be used.
  • Lightly saturate the surface and back-brush any excess finish. Be sure to eliminate puddling and evenly distribute the finish.
  • Maintain a wet edge when applying.
  • Apply product end-to-end or to board lengths to prevent lap marks.
  • Avoid applying finish too heavily. One coat application. Applying a thin second coat will darken the color of the finish if desired.
  • For optimum performance, coat all accessible sides especially board ends.
Maintenance
  • When color has faded and water is readily absorbed by the substrate, prep/clean with a product such as BEHR PREMIUM No. 63, allow to dry, and apply a new/fresh coat of wood finish. Product can be applied annually if needed.
Dry Time
  • Finish dries in 60 minutes (i.e. dry to touch, allows for foot traffic and placement of furniture).
Disposal
  • For disposal of empty containers and unused product contact your household refuse collection service.

Read Application Instructions

LIMITED WARRANTY

For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read Warranty Information

BEHR PREMIUM® QUICK DRY Oil Base Wood Finish is rated 2.3 out of 5 by 4.
Rated 4 out of 5 by from nice wood finish This wood finish is wonderful, great coverage and worth every penny!
Date published: 2018-11-27
  • y_2019, m_4, d_20, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_10102051000400010-E, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_behr
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 286ms
  • REVIEWS, PRODUCT

How-To

Find step-by step instructions in our how-to articles and videos.