BEHR PREMIUM^® All-In-One Wood Cleaner

Where to Use

Exterior Wood & Composites, Decks, Siding, Shakes, Shingles, Fences & Patio Furniture, Vinyl & Aluminum Siding, Masonry, Stucco and Concrete.

• Removes exterior stains caused by mold, mildew, algae & fungus. Removes household stains such as BBQ Sauce, Ketchup, Wine, etc. Neutralizes wood surface after stripping. Restores the wood to its natural colour.

Preparation

The following steps and products are recommended for best results.

• Be sure to have a source for water, hose with nozzle and stiff bristle broom or brush.
• Wear protective clothing, goggles, acid resistant gloves.
• Always use BEHR PREMIUM® NO. 63-N All-In-One Wood Cleaner after application of BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper.
• Prevent all rinse solution from entering storm drains.

Application

• Must apply between 40-90˚F (4.5-32˚C).
• Shake well before use. Conduct a small test patch in an inconspicuous area to ensure product performance.
• Be sure that the plastic mixing container is large enough to hold up to 2 gallons of diluted solution.
• DO NOT MIX IN METAL CONTAINER. Dilute 1 part of product with 1 part tap water (1:1 dilution) in a clean plastic container.
• To remove rust, tannin bleed, red clay stains and for extremely hard to clean weathered wood surfaces, use product at full strength.
• Wet surfaces with water prior to cleaning. Apply solution liberally with a pump sprayer, brush, mop or roller. Keep the surface completely wet with solution for 10-15 minutes.
• Scrub surface using a stiff bristle broom or brush. The solution will foam.
• After scrubbing, rinse thoroughly with water at normal pressure, or use a pressure washer at low setting (500-1200 PSI). DO NOT USE HIGH PRESSURE as this may harm the wood.
• Surfaces other than wood may be dulled if not rinsed off quickly.

Disposal

• Biodegradable. Properly dispose of all soiled rags. To recycle or properly dispose of paint in your community, contact your household refuse collection service.

For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.