Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out

You are leaving the BEHR® Consumer website. You will be logged out.

Ask an Expert by Email

Thank you,
Your email has been sent to our experts.

See all Interior paint how-to »

How to Create a Sponge On Finish

Skill:  Intermediate DIY'er

A Sponge On Finish creates a distinctive textured pattern on your wall. Depending on the amount of pressure you apply and the distance between sponge imprints, the look can range from subtle to dramatic.

For Best Results:

BEHR Faux Glaze has an open working time of 15 minutes. Work at a quick and steady pace to avoid the development of hard lines in your project.

If you prefer a subtle Sponge On Pattern, do not squeeze the sponge or push down too hard onto the wall surface.

Suggested Supplies
  • Sea Sponge
  • Bucket
  • Brush (Nylon/Polyester)
  • Rags
  • Stir Stick
  • Gloves
  • Roller Cover and Frame
  • Drop Cloths
  • Extension Pole
  1. Step 1

    To create the Sponge On Finish, you will need a sea sponge , a bucket of water, a paintbrush and a cloth or rag.

  2. Step 2

    Paint the base color and allow it to dry completely before glazing.

    For additional help on your interior painting project, refer to the how-to's listed here.

  3. Step 3

    To prepare the BEHR Faux Glaze, you will combine four parts glaze to one part BEHR Paint. For example, in an average sized room, you will use one gallon of BEHR PREMIUM PLUS WITH STYLE® Faux Glaze and one quart of PREMIUM PLUS ULTRA® Paint and Primer in One or PREMIUM PLUS® Paint. Stir the paint and glaze mixture thoroughly.

  4. Step 4

    Use a paintbrush to coat a water-dampened sea sponge with the glaze color. Blot excess paint with a clean cloth or rag.

  5. Step 5

    Apply the sponge to the wall surface, creating random patterns as you blot with the sponge. Continue across your wall until the entire surface is covered.