Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out

You are leaving the BEHR® Consumer website. You will be logged out.

Ask an Expert by Email

Thank you,
Your email has been sent to our experts.

See all Products »

BEHR PRO™ i100 Interior Dead Flat No. PR110

BEHR PRO™ i100 Interior Dead Flat No. PR110

The BEHR PRO PR110 Dead Flat Interior Paint offers high hide and good touchup and is a great choice for high-turnover properties. This water-base professional finish can be applied by brush, roll or spray for your convenience.


Technical Data Sheet

A flat sheen has a matte, non-reflective finish that's easy to clean, touches up well and will also hide minor surface imperfections.
Where to Use
Ideal for walls and ceilings in high turnover properties.
Up to 37 m2 per 3.79 L

Latest Featured Reviews

There are currently no featured reviews for BEHR PRO™ i100 Interior Dead Flat No. PR110

Tools & Resources

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

SDS & Data Sheet

Available In

Where to Use

Can be applied to properly prepared and primed interior drywall, wood, metal, architectural plastics, cured plaster and masonry.  Not for use on floors.

Surface Preparation

The following steps are recommended for product performance.

  • All surfaces must be clean, free of dust, chalk, oil, grease, wax, polish, mold and mildew stains, loose and peeling paint, rust and all other foreign substances. Glossy surfaces must be scuff sanded with appropriate sandpaper prior to coating.
  • Fill all gaps with a 100% acrylic, siliconized, paintable caulking and allow to completely dry prior to coating.


  • Surfaces to be painted must be cleaned, primed with an appropriate primer and ready to accept a finish coat.
  • Prime new drywall with a product such as BEHR PREMIUM PLUS® All-in-One Primer & Sealer No. 75. Use product when the surface and air temperatures are between 2-32°C.
  • Airless Spray: .015"-.021" tip with 60 mesh filter.
  • Roller: Use a high quality 10-13 mm nap roller cover on smooth surfaces or 13-19 mm nap roller cover on semi-rough or porous surfaces.
  • Brush: Use a high-quality nylon/polyester brush.
  • Coverage: Up to 37 m2 (400 sq ft) per 3.79 L depending on the surface texture, porosity and application method.
  • Certain colours may require additional coats for complete hide.
  • DO NOT THIN. Product is formulated for use at package consistency only.
  • Intermix containers of same colour and product to ensure colour and sheen uniformity.
  • For disaster restoration, use a product such as water-base KILZ MAX® Primer or oil-base KILZ® Original Primer to permanently block severe stains and odours. After priming, test for stain bleed-through by applying the topcoat to a small section. If the stain bleeds through the topcoat, apply a second coat of primer and test again before top-coating the entire area. If bleeding continues, allow primer to dry a full 24 hours before top-coating.

Clean Up & Disposal

  • Clean all tools and equipment with soap and water.
  • For disposal of empty containers and unused product, contact your household refuse collection service.
  • To reduce waste, consult with your retailer or an online paint calculator to determine the correct amount of paint to purchase.

Dry Time

  • Dries to touch in 1 hour at 25° C and 50% humidity.
  • Recoat after 2 hours.
  • Longer dry time required in cooler temperatures and higher humidity.
  • After 2 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.