PREMIUM PLUS ULTRA® Interior Eggshell Enamel No. 2750
For smooth, subtle elegance on your home's interior walls and trim, choose BEHR PREMIUM PLUS ULTRA Interior Eggshell Enamel. This soft sheen creates a velvety appearance that's easy to clean and stands up to scrubbing.
Properly prepared coated and uncoated Interior surfaces. Ideal for Family Rooms, Living Rooms, Dining Rooms, Bedrooms, Hallways and Ceilings.
1 HR Dry Time 2 HR Recoat Time
250-400 Sq. Ft
Coverage per Gallon
Soap & Water
Preparation & Prime†
All surfaces should be properly prepared and cleaned. Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry.
Remove mildew stains with a mildew stain remover. Scuff sand glossy surfaces and repair imperfections. Remove all dust with a damp cloth, allow to dry.
Allow new stucco, plaster and masonry to cure for 30 days before painting.
Use BEHR PREMIUM PLUS ULTRA® paint as a primer for properly prepared uncoated or painted interior surfaces, including woods that contain tannins (two primer coats required for redwood and cedar) and heavily stained areas.
Lock in stains with BEHR PREMIUM PLUS ULTRA as a spot primer.
For heavy stains, test for stain bleed-through by applying BEHR PREMIUM PLUS ULTRA as a topcoat to a small section. If the stain bleeds through the topcoat, spot prime another coat to the stained area and test again before topcoating. If bleeding continues, a longer dry time is needed before top coating.
For drastic color changes or when applying deep colors denoted with a dagger (†) on the color chip, apply a tinted primer coat of BEHR PREMIUM PLUS ULTRA if needed.
Apply when air and surface temperatures are between 50-90°F (10-32°C).
Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
Use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015-.019" spray tip, 60 mesh filter).
Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
Certain colors may require more than one coat for complete hide.
Darker colors may require additional dry time between coats. Cooler temperatures or higher humidity may prolong drying time.
After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent. Dry paint film is mildew resistant.
Do not use on floors.
For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.
To consult with a Behr Certified Coatings Professional, call Behr Pro Hotline Toll Free number at 1-877-776-3961 (U.S.A. only).
Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.