PREMIUM PLUS ULTRA® Stain-Blocking Ceiling Paint No. 5558
For advanced performance and stain-blocking on all of your home’s ceilings, choose BEHR PREMIUM PLUS ULTRA® Stain-Blocking Ceiling Paint. Its flat sheen hides minor surface imperfections, and can be tinted to light colors.
Properly prepared coated and uncoated Interior Ceilings.
1 HR Dry Time 2 HR Recoat Time
250-400 Sq. Ft
Coverage per Gallon
Soap & Water
Preparation & Prime
Remove loose paint, wash off any dirt and grease with detergent, remove mildew stains with a mildew stain removing product.
Scuff sand glossy surfaces.
Countersink nailheads, repair imperfections and sand smooth.
Remove all dust with a damp cloth, allow to dry.
Allow new stucco, plaster and masonry to cure for 30 days before priming.
Make sure that there are no active water problems and that any previous water damage is fully dry.
Use BEHR PREMIUM PLUS ULTRA® STAIN-BLOCKING CEILING PAINT as a primer for repaired or uncoated surfaces.
Lock in stains with BEHR PREMIUM PLUS ULTRA STAIN-BLOCKING CEILING PAINT as a spot primer. For heavy stains, test for stain bleedthrough by applying BEHR PREMIUM PLUS ULTRA STAIN-BLOCKING CEILING PAINT as a topcoat to a small section. If the stain bleeds through the topcoat, spot prime another coat to the stained area and test again before topcoating the entire ceiling. If bleeding continues, a longer dry time is needed before topcoating. Additional coats may be needed to achieve hide.
For drastic color changes, apply a primer coat of BEHR PREMIUM PLUS ULTRA STAIN-BLOCKING CEILING PAINT if needed.
Use product when the surface and air temperatures are between 50-90°F (10-32°C).
Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
Use a high quality 3/8-1/2” nap roller cover, nylon/polyester brush or an airless sprayer (.015-.019” spray tip, 60 mesh filter).
Popcorn style acoustic ceilings; use acoustic ceiling roller cover (1/2-3/4” nap) or airless sprayer (.015-.019” spray tip, 60 mesh filter).
Coverage is 250-400 sq. ft. (23-37 m2) per gallon depending on the surface texture, porosity and application method.
Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
Multiple coats may be required to complete hide.
Dries to touch in 30 minutes at 77°F (25°C) and 50% humidity, re-coat in 1 hour.
Longer dry time required in cooler temperatures and in higher humidity.
Clean Up & Storage
Use soap and water.
Properly dispose of all soiled rags and protect unused product from freezing.
For disposal of empty containers and unused product, contact your local household refuse collection service.
To consult with a Behr Certified Coatings Professional, call Behr Pro Hotline Toll Free number at 1-877-776-3961 (U.S.A. only).
PREMIUM PLUS ULTRA® Stain-Blocking Ceiling Paint No. 5558 is rated
4.6 out of
Rated 5 out of
Great PaintI bought this to go in my bathroom the color was great and it was easy to clean up.
Date published: 2016-11-04
Rated 5 out of
Amazing CoverageWe moved into a house that needed complete interior repainting. The contractor beige over multiple dark colors was our initial challenge, but Behr covered them all. Then came the beadboard ceiling in the family room. The fireplace had added a coating of greasy black grime across most of the ceiling. We scrubbed, but made little progress other than smudging it to a lighter gray. Two coats of Premium Plus Ultra Stain-Blocking Ceiling Paint covered it completely! We LOVE Behr. Feels like a new home!
Date published: 2016-11-03
Rated 5 out of
Great coverageRemoved 30 year old paint from my ceilings, used this paint after removal. This paint covered completely with one coat, no second coat needed.
Date published: 2019-04-15
Rated 5 out of
Great features!I bought this last fall to paint our ceiling in the kitchen. Great product!
Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.