Email your BEHR PRO Pro Paint Specialist

Thank you for reaching out.
Your BEHR PRO TM Pro Paint Specialist will be in touch within 24 hours.
Your request was sent to the following BEHR PROTM Pro Paint Specialist.
direct:
Specialist Store Hours:
Monday - Friday
Sign up for My BEHR PRO to receive the latest news and special offers from BEHR.
Sign Up Now
Name*


Characters left:
512

Residential Painter

Commercial Painter

General Contractor

Property Manager

Other

Fields with an asterisk (*) are required. See our privacy policy
 

Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out


You are leaving the BEHR® Consumer website. You will be logged out.



Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

PREMIUM PLUS® Exterior Satin Enamel No. 9050

PREMIUM PLUS® Exterior Satin Enamel No. 9050

For effortless effect on a variety of outdoor surfaces, choose BEHR PREMIUM PLUS® Exterior Satin Enamel paint. This radiant sheen creates a sleek appearance, with a durable finish that's formulated to withstand wear. It's ideal for trim, doors, and windows, but it's also great for shutters and outdoor furniture.

 

GREENGUARD Certified

Finish
A satin sheen creates a pearl-like finish that’s durable and dirt-resistant. It will also resist moisture, fading and stains.
Where to Use
Virtually all Exterior surfaces
Coverage
250-400 Sq. Ft. per Gallon

Latest Featured Reviews

FOR TINT BASES – DO NOT USE WITHOUT THE ADDITION OF TINTING COLORANTS

Browse for Colors Online

Browse, coordinate and preview colors now, with ColorSmart by BEHR ®

START NOW »

Tools & Resources

Find a Rep

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

Ideal for Wood, Vinyl and Fiber Cement Sidings; Stucco, Brick, Masonry and Fences.

Usage Summary

1 HR Dry Time 
2 HR Recoat Time

250-400 Sq. Ft 
Coverage per Gallon

Soap & Water
Clean-Up

Protect
from Freezing

Preparation

  • Use on properly prepared and cleaned coated and uncoated Exterior surfaces.
  • Countersink nailheads, fill and sand smooth.
  • Remove rust, loose or peeling paint. Repair imperfections and sand smooth.
  • Wash off dirt, grease and chalk with detergent and/or powerwash.
  • Remove mildew stains with a mildew stain removing product.
  • Clean and sand new or weathered wood.
  • Scuff sand or degloss smooth or glossy surfaces.
  • Scuff sand or etch metals.
  • Rinse and allow to dry.
  • Caulk windows, doors and other openings.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.

Prime†

  • Use BEHR PREMIUM PLUS® Paint as a primer over properly prepared coated or uncoated surfaces
  • For stain-blocking, painting over woods with tannins, or over oil-based or glossy surfaces, prime with a product such as BEHR PREMIUM PLUS Interior/Exterior Multi-Surface Primer & Sealer No. 436.
  • For drastic color changes or when applying deep colors denoted with a dagger (†) on the color chip, apply a custom tinted primer if needed.
  • Prime all metal surfaces before painting.

Application

  • Apply product on dry substrates when air and surface temperatures are between 35°-90°F (2°-32°C) and will remain between 35°-90°F (2°-32°C) for at least 4 hours after applying.
  • Do not paint when rain or heavy condensation is expected.
  • Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
  • On semi-smooth surfaces, use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015-.021" spray tip, 60 mesh filter).
  • On rough surfaces, use a high quality 3/4-1" nap roller cover.
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
  • Certain colors may require additional coats for complete hide. On heavy stains and woods that contain tannins, allow 12-16 hours of dry time between coats.
  • Cooler temperatures or higher humidity may prolong drying time. After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant.
  • When applying to vinyl, color choice must be the same color or lighter than the existing color.
  • Do not use on floors.

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call Behr Pro Hotline Toll Free number at 1-877-776-3961 (U.S.A. only).

Meet your dedicated BEHR PRO Pro Paint Specialist

Behr and The Home Depot© have teamed up to create a service experience specifically designed for pro painters like you.

Enter your ZIP code to find the closest Pro Paint Store and Specialist.

We’re sorry. There are no BEHR PRO Pro Paint Specialists within 10 miles. Please try your search again.
We’re sorry. There was an error when searching for your nearest BEHR PRO Pro Paint Specialists. Please try your search again.

Save up to 20% OFF BEHR® Paints, Stains & Primers

Contact Your Local BEHR PRO Pro Paint Specialist Now

not your store?
Contact Rep Now

Email your BEHR PRO Pro Paint Specialist

Thank you — your email has been sent!

Thank you for reaching out.

Your BEHR PRO Paint Specialist will be in touch within 24 hours.


Your request was sent to the following BEHR PRO Paint Specialist:

,
Characters left:
My Role in Paint Selection (optional)
Characters left:
Close