Email your BEHR PRO Pro Paint Specialist

Thank you for reaching out.
Your BEHR PRO TM Pro Paint Specialist will be in touch within 24 hours.
Your request was sent to the following BEHR PROTM Pro Paint Specialist.
direct:
Specialist Store Hours:
Monday - Friday
Sign up for My BEHR PRO to receive the latest news and special offers from BEHR.
Sign Up Now
Name*


Characters left:
512

Residential Painter

Commercial Painter

General Contractor

Property Manager

Other

Fields with an asterisk (*) are required. See our privacy policy
 

Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out


You are leaving the BEHR® Consumer website. You will be logged out.



Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

BEHR PREMIUM® 1-Part Epoxy Concrete & Garage Floor Paint No. 900

BEHR PREMIUM® 1-Part Epoxy Concrete & Garage Floor Paint No. 900

Beautify and protect your home's interior and exterior concrete surfaces with  BEHR PREMIUM 1-Part Epoxy Concrete and Garage Floor Paint. This water-based paint can protect against hot-tire pick-up, automotive fluids and most household chemicals. This epoxy paint will provide a beautiful protective finish on driveways, garage floors, pool decks, walkways and interior concrete surfaces.

 

Click Here to see available colors.

Finish
Satin finish
Where to Use
Interior & Exterior concrete and masonry surfaces
Coverage
Rough Surface: 300-400 Sq. Ft. Per Gallon ; Smooth: 400-500 Sq. Ft.

Latest Featured Reviews

FOR VERTICAL SURFACES, USE BEHR PREMIUM SOLID COLOR OR SEMI-TRANSPARENT CONCRETE STAIN.

Find a Rep

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

Interior or Exterior surfaces such as: Porous Concrete, Masonry, Stone and Brick. Ideal for horizontal surfaces such as: Garage Floors, Driveways, Basements and Porches.DO NOT use on vertical surfaces or areas subject to hydrostatic pressure. NOT for industrial use. DO NOT use on areas subject to fork-lifts.

Usage Summary

Rough Surface

300-400 Sq. Ft
Smooth Surface
400-500 Sq. Ft.

1 HR
Dry To Touch
4-6 HR
Recoat Time

Soap & Water
Clean-Up

Protect
from Freezing

Preparation

New and Uncoated Concrete or Masonry Surfaces:

  • New concrete must cure for a minimum of 30 days.
  • For proper penetration and adhesion of topcoat, clean and etch the surface.
  • Apply a product such as BEHR PREMIUM CONCRETE & MASONRY BONDING PRIMER NO. 880 to increase adhesion of topcoat to the surface. Follow all label instructions.

Painted, Stained or Sealed Concrete:

  • Option 1- To completely strip the entire surface using a concrete & masonry paint striper.
  • Option 2- To recoat over an existing coating, remove any loose or peeling paint and scuff sand the surface.
  • Clean previously coated surfaces in sound condition.
  • Clean and etch any bare concrete area.
  • Spot prime all bare concrete areas with a product such as BEHR PREMIUM CONCRETE & MASONRY BONDING PRIMER NO. 880 to increase adhesion of topcoat to the surface. Follow all label instructions.

Application

  • DO NOT THIN. Intermix all cans of same product to ensure color uniformity. Stir before applying. Use product when air and surface temperatures are between 50-90°F (10-32°C).
  • Apply a thin, even coat using a 3/8" nap roller cover, pad applicator or a nylon/polyester brush.
  • Allow first coat to dry before deciding if a second coat is necessary. For uniformity apply a second coat (in a criss-cross direction).
  • DO NOT APPLY MORE THAN TWO COATS. An annual touch-up may be required in areas subject to tire traffic.

Dry Time

  • Longer dry time required in cooler temperatures and in higher humidity.
  • The floor may be subjected to light foot traffic after 24 hours. Allow 72 hours before subjecting surface to heavy foot traffic or repositioning furniture.
  • Allow 7 days before subjecting to automotive tires. Premature heavy traffic will cause paint failure requiring spot recoating.
  • If necessary, corrugated cardboard may be used underneath automobile tires after 72 hours.
  • Wait at least 30 days before rinsing or cleaning. Use a mild detergent as needed.
  • Abrasive cleaners and pressure-washers should be used carefully to avoid premature paint failure.

Disposal

  • Properly dispose of all soiled rags. To recycle or properly dispose of product in your community, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call Behr Pro Hotline Toll Free number at 1-877-776-3961 (U.S.A. only).

Meet your dedicated BEHR PRO Pro Paint Specialist

Behr and The Home Depot© have teamed up to create a service experience specifically designed for pro painters like you.

Enter your ZIP code to find the closest Pro Paint Store and Specialist.

We’re sorry. There are no BEHR PRO Pro Paint Specialists within 50 miles. Please try your search again.
We’re sorry. There was an error when searching for your nearest BEHR PRO Pro Paint Specialists. Please try your search again.

Looks like a BEHR PRO Pro Paint Specialist is near you!

not your store?
Learn More

Email your BEHR PRO Pro Paint Specialist

Thank you — your email has been sent!

Thank you for reaching out.

Your BEHR PRO Paint Specialist will be in touch within 72 hours.


Your request was sent to the following BEHR PRO Paint Specialist:

direct:
,
Characters left:
My Role in Paint Selection (optional)
Characters left:
Close