Email your BEHR PRO Pro Paint Specialist

Thank you for reaching out.
Your BEHR PRO TM Pro Paint Specialist will be in touch within 24 hours.
Your request was sent to the following BEHR PROTM Pro Paint Specialist.
direct:
Specialist Store Hours:
Monday - Friday
Sign up for My BEHR PRO to receive the latest news and special offers from BEHR.
Sign Up Now
Name*


Characters left:
512

Residential Painter

Commercial Painter

General Contractor

Property Manager

Other

Fields with an asterisk (*) are required. See our privacy policy
 

Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out


You are leaving the BEHR® Consumer website. You will be logged out.



Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

BEHR PREMIUM® Solid Color Concrete Stain No. 800

BEHR PREMIUM® Solid Color Concrete Stain No. 800

A durable solid color stain designed to help protect and enhance both exterior and interior, vertical and horizontal concrete surfaces. This Siliconized 100% Acrylic formula is designed to provide a long-lasting durable finish.

 

Click Here to see available colors.

Finish
Flat finish.
Where to Use
Interior & Exterior concrete and masonry surfaces
Coverage
Rough: 400-500 Sq. Ft per ; Smooth; 500-600 Sq. Ft. per Gallon

Latest Featured Reviews

FOR BASEMENTS, USE BEHR PREMIUM® BASEMENT & MASONRY WATERPROOFER

Find a Rep

Enter your Zip/Postal Code to find the nearest Home Depot

SDSs, Tech Data & Certifications

Where to Use

Properly prepared Interior or Exterior surfaces such as: Concrete, Masonry Walls, Basements, Patios, Sidewalks, Driveways*, Garage Floors*, Tennis Courts, Cement Blocks, Pillars and Brick. Not for use on surfaces subject to hydrostatic pressure.

  • * Driveways and Garage Floors - Lack of proper surface preparation and/ or over-application can lead to automobile tires lifting the product from the surface.
  • CAUTION: Stained surfaces may become slippery when wet. Use caution when walking on surface when moisture is present. Use a product such as BEHR PREMIUM® NON-SKID NO. 970 to help prevent slipping.

Usage Summary

Rough Surface

400-500 Sq. Ft
Smooth Surface
500-600 Sq. Ft.

2 HR Dry To Touch
2-4 HR Recoat Time

Soap & Water
Clean-Up

Protect
from Freezing

Preparation & Prime

New and Uncoated Concrete or Masonry Surfaces:

  • New concrete must cure for a minimum of 30 days.
  • For proper penetration and adhesion of topcoat, use a concrete & masonry cleaner and etcher to clean and etch the surface. Remove mildew stains with a mildew stain removing product. Follow all label instructions.
  • Apply a product such as BEHR PREMIUM Concrete & Masonry Bonding Primer No. 880 to increase adhesion of topcoat to the surface. Follow all label instructions.

Painted, Stained or Sealed Concrete:

  • Option 1- To completely strip the entire surface, use a concrete & masonry paint stripper product.
  • Option 2- To recoat over an existing coating, remove any loose or peeling paint and scuff sand the surface.
  • Clean previously coated surfaces in sound condition.
  • Clean and etch any bare concrete surface.
  • Spot prime all uncoated areas with a product such as BEHR PREMIUM Concrete & Masonry Bonding Primer No. 880 to increase adhesion of topcoat to the surface. Follow all label instructions.

Application

  • DO NOT THIN. Intermix all cans of same product to ensure color uniformity. Stir stain before and occasionally during application.
  • Use product when air and surface temperatures are between 50-90°F (10-32°C).
  • Apply a thin, even coat using a 1/4"-3/8" nap roller cover, pad applicator or a nylon/polyester brush at a spread rate of 400-600 sq. ft. (37-56 m2) per gallon. Use long, even strokes in one direction to avoid lap lines.
  • Since concrete varies in texture/porosity, two coats may be required for uniform color appearance. Apply a second coat (in a criss-cross direction) if uniformity is needed. Recoat after 2-4 hours. Periodic touch-ups may be necessary.

Dry Time

  • Longer dry time required in cooler temperatures and in higher humidity.
  • Allow 24 hours for light foot traffic.
  • Park tires on corrugated cardboard for 14 days after applying stain. After two weeks, dry stained surface may be cleaned with a mild, non-abrasive liquid detergent.

Disposal

  • To recycle or properly dispose of product in your community, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call Behr Pro Hotline Toll Free number at 1-877-776-3961 (U.S.A. only).

Meet your dedicated BEHR PRO Pro Paint Specialist

Behr and The Home Depot© have teamed up to create a service experience specifically designed for pro painters like you.

Enter your ZIP code to find the closest Pro Paint Store and Specialist.

We’re sorry. There are no BEHR PRO Pro Paint Specialists within 10 miles. Please try your search again.
We’re sorry. There was an error when searching for your nearest BEHR PRO Pro Paint Specialists. Please try your search again.

There’s a BEHR PRO Pro Paint Specialist near you!

Contact your Pro Paint Specialist today to find out how you can receive 20% OFF your first order of BEHR© Paints, Stains and Primers.

not your store?
Learn More

Email your BEHR PRO Pro Paint Specialist

Thank you — your email has been sent!

Thank you for reaching out.

Your BEHR PRO Paint Specialist will be in touch within 24 hours.


Your request was sent to the following BEHR PRO Paint Specialist:

,
Characters left:
My Role in Paint Selection (optional)
Characters left:
Close