AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

BEHR MARQUEE® Stain-Blocking Paint and Primer Ceiling Paint No. 1458

Avg. Rating:

BEHR MARQUEE Stain-Blocking Ceiling Paint delivers high-performance one-coat hide guaranteed* with every color in the exclusive MARQUEE Interior One-Coat Color Collection. This antimicrobial-mildew resistant finish has excellent durability, washability and stain resistance.

* Valid only when tinted to designated colors from the One-Coat Hide Color Collection. Learn More

AVAILABLE IN OVER 2,500 COLORS
Find the perfect color for all your clients project. Explore Colors

1 gal can of Marquee Ceiling Paint

Technical Data Sheets

Safety Data Sheets

Product Certifications & Declarations

Finish

A ceiling flat with a gloss level of <3 at 60° and sheen of <3 at 85°

Best for in use

Use on properly prepared interior ceilings

Coverage

250-400 sq. ft. per Gallon depending on the application method and substrate porosity. It does not include the loss of material from spraying.

PRODUCT USAGE
  • Clock icon

    1 HR Dry Time
    2 HR Recoat Time

  • Paint coverage icon.

    Up to 400 Sq. Ft.
    Coverage per Gallon

  • Thermometer Icon

    Protect
    from Freezing

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

Properly prepared coated and uncoated Interior Ceilings.  For water stains, apply MARQUEE Ceiling Paint as a primer to the stained area prior to topcoat.

Preparation

  • Properly prepare and clean all surfaces.
  • Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain remover.
  • Scuff sand glossy surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.
  • Darker colors may require additional dry time between coats. ​

Read More

Prime

Use MARQUEE Paint as a primer for properly prepared uncoated, glossy, porous or repaired ceilings.

Stained Surfaces

  • Lock in water stains with MARQUEE Ceiling Paint as a spot primer.
  • For heavy stains, test for stain bleed-through by applying MARQUEE Ceiling Paint to a small section.
  • If the stain bleeds through, spot prime with another coat to the stained area and test again before topcoating.
  • If bleeding continues, a longer dry time is needed before topcoating.

Read More

Application

  • Apply when air and surface temperatures are between 50-90°F (10-32°C).
  • Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
  • Use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015 - .019" spray tip, 60 mesh filter).
  • Popcorn style acoustic ceilings; use acoustic ceiling roller cover (1/2-3/4" nap) or airless sprayer (.015-.019" spray tip, 60 mesh filter).
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.
  • Darker colors may require additional dry time between coats.
  • Cooler temperatures or higher humidity may prolong drying time.

Read More

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Read More

Read More

WARRANTY

LIFETIME LIMITED WARRANTY

Behr Process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Marquee Consumer Reports

BEHR MARQUEE INTERIOR PAINTS REPORT

See how BEHR MARQUEE Interior Paints are rated by Consumer Reports.

 

Consumer reports does not endorse products or services
View Report

BEHR MARQUEE INTERIOR PAINTS REPORT

See how BEHR MARQUEE Interior Paints are rated by Consumer Reports.

 

Consumer reports does not endorse products or services
View Report

Reviews

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
Compare
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot