AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

Technical Data Sheets

Safety Data Sheets

Product Certifications & Declarations

Finish

N/A

Best for use in

Designed for use under flat and low sheen paints only. Do not topcoat with glossy paint finishes.

Coverage

250 - 400 Sq. Ft. per Gallon depending on the surface texture, porosity and application method. It does not include the loss of material from spraying.

PRODUCT USAGE
  • Ideal for ceilings and walls over properly prepared drywall.

Surface Preparation

  • Cover all nail and screw heads with joint compound according to directions and sand to smooth surface.
  • Tape drywall and apply joint compound and allow to fully cure according to directions prior to priming.
  • Sand to smooth surface before priming.
  • Wipe off dust with a damp cloth, allow to dry thoroughly.

Read More

Application

  • Eye protection is recommended.
  • Use only when temperatures are between 50°F (10°C) and 90°F (32°C).
  • Coverage is approximately 300-400 square feet per gallon depending on surface porosity.
  • For airless spray applications, tip size should be .017"-.021" tip/60 mesh filter.
  • May be tinted with up to 2 ounces of universal colorant per gallon.
  • Glossy Surfaces: Not recommended. Please use KILZ® PREMIUM or KILZ 2® Primers.
  • Masonry, Brick, Stucco and Plaster: Not recommended. Please use KILZ® PREMIUM or KILZ 2® Primers.
  • Stainblocking: Not formulated to block stains - For stainblocking, use oil-based primers like KILZ® ORIGINAL and water-based primers like KILZ 2® or KILZ® PREMIUM.

Read More

Dry Time at 77°F (25°C), 50% RH

  • Dries to touch in 30 minutes. Application at lower temperatures, high humidity or poor ventilation will affect dry time.
  • Recoat or topcoat after 2 hours.

Read More

Clean-Up & Disposal

  • Use soap and water to clean hands, tools, and spills.
  • For recycling or disposal of empty containers and unused product, contact your household refuse collection service.
  • To reduce waste, consult with your retailer or online paint calculator to determine the correct amount of paint to purchase.
  • To consult with a KILZ Certified Coatings Professional, call 1-866-PRIMER-1 (U.S.A. only).

Read More

Read More

WARRANTY

For one year from the date of purchase, Masterchem Industries LLC warrants to the original residential consumer purchaser (1) that the product meets Masterchem Industries LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. In the event that this product proves to be defective within one year from the date of purchase, Masterchem Industries LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty is not transferable. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. For warranty service, call: 1-866-774-6371, or email: techservice@masterchem.com. Masterchem Industries LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Reviews

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
Compare
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot