BEHR® Oil-Based Spar Urethane Aerosol No. B721044

Average Rating:
false

BEHR Oil-Based Spar Urethane Aerosol is a clear protective finish that adds a shield to your interior and exterior wood surfaces that are stained with BEHR Advanced Formula Oil-Based Wood Stain. This durable polyurethane is easy to apply and offers UV protection to prolong the life of your wood surface and creates a smooth, lasting clear finish. This product enhances the look and color of your wood surface, allowing its true beauty to shine through. Multiple sheens are available depending on your desired look.

See Our Selection of Interior Oil-Based Stains and Finishes.

Finish
Available in Satin, Semi-Gloss and Gloss Finishes.
Best for use in
For use on properly prepared interior/exterior bare or stained wood surfaces such as doors, windows, outdoor furniture, cabinets, and trim.
Coverage
15 - 20 Sq. Ft.

Read important application instructions to ensure optimum paint performance.

Technical Data Sheets

Download TDS
Home Depot Xtra membership logo

Join The Home Depot® Pro Xtra Loyalty Program

Members get exclusive, money-saving offers and special coupons for the products they use most.

  • Save up to 20% on paints, stains, and primers
  • Free direct-to-job site paint delivery
  • Free Factory tinting & color matching
  • Dedicated field support
  • Phone-in orders
  • Lifetime of color history by job
Join Now

Product Usage

Icon of spray can spraying paint.

3 Coats
Required

Icon representing length and width dimensions to determine square footage

Spread Rate:
15-20 Sq. Ft.

Icon of cleaning paint brush with mineral spirits

Clean-Up
Mineral Spirits

Where to UseBlank space if empty.

For use on properly prepared interior/exterior bare or stained wood surfaces such as doors, windows, outdoor furniture, cabinets, and trim. Not suitable for use on floors.

Usage SummaryBlank space if empty.
Surface PreparationBlank space if empty.

The following steps are recommended for the best results.

  • For refinishing, remove all wax or cleaner build-up with wax stripper or degreaser, prior to sanding.
  • Sand all surfaces in the direction of the wood grain to desired smoothness.
  • Remove all dust from sanded surfaces and clean with a tack cloth.
  • The surface must be dry and free of old finishes in poor condition, paint, wax, grease, polish, dirt or other foreign matter.
  • Do not use steel wool.
  • If desired, apply BEHR® Wood Stain. Follow all label instructions.
ApplicationBlank space if empty.
  • Do not apply in direct sunlight or in temperatures below 55°F (10°C) or above 90°F (32°C).
  • Shake can vigorously for 1 minute after mixing ball begins to rattle and often during use.
  • Hold can 12 inches from the surface and depress button fully.
  • Move evenly across the surface with slightly overlapping strokes.
  • On unfinished wood, apply sufficient material to seal open joints, edges, and end-grain.
  • Apply thin coats to avoid runs and sags. Recoat within 2-4 hours.
  • At least 3 coats are recommended.
  • Note: for exterior surfaces or for unfinished wood, 4 coats are recommended.
  • After the final coat, allow at least 24 hours before normal use.
Nozzle CareBlank space if empty.
  • After each use, clear valve by holding can upside down and spraying until only clear gas comes out.
  • If the spray button becomes clogged, wear eye protection, wipe off button opening with lacquer thinner.
  • Do not stick a pin in spray button opening.

Read Application Instructions

LIMITED WARRANTYBlank space if empty.

For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. In the event this product proves to be defective within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read Warranty Information

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 121ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Ready to get started?

 

Contact a BEHR PRO® rep

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
JOIN THE HOME DEPOT®
PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

Home Depot Pro XTRA royaly program
SIGN UP ON HOMEDEPOT.COM
Technical services

1-800-854-0133 ext. 2

Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

Never miss out on the latest deals and news from behr.