BEHR® Microlon® Roller Covers

Avg. Rating:
false

BEHR Microlon rollers combine the high carrying capacity of a traditional microfiber roller and the ultra-smooth finish of a traditional woven roller. Specifically engineered to use with all paints and stains on smooth to semi-smooth surfaces. Rollers are constructed with a double-thick polypropylene core that resists water, solvents, and cracking.

Click Here to find out if BEHR Microlon rollers are available in a Home Depot® nearest you.

Finish
Resists shedding for an ultra-smooth finish.
Best for use in
7/16-inch nap is ideal for walls, ceilings, and floors with smooth to semi-smooth surfaces.
Coverage
Holds more paint for excellent coverage.

Read important application instructions to ensure optimum paint performance.

BEHR MICROLON ROLLER SPECIFICATIONS:

  • Roller Length: 9"
  • Nap Size: 7/16"
  • Fabric Type: Microfiber
  • Surface Type: Smooth & Semi-Smooth
  • Ideal Projects: Walls, Ceilings & Floors
  • Paint Type: All Paints & Stains

Product Usage

Where to UseBlank space if empty.

Use with all paints and stains on smooth to semi-smooth surfaces.

To UseBlank space if empty.
  • Pre-wet roller cover before use. This will help prime the roller for paint and remove any loose fibers from the roller cover. To pre-wet, dip the roller cover into a water-filled bucket or lightly run it under the sink. Attach it to your paint frame and spin out the water until the roller cover is slightly damp. Always pre-wet roller covers with the same type of liquid you use on your project. Pre-wet with water for water-based coatings and pre-wet with mineral spirits for oil-based coatings.
  • To load, firmly roll the roller into the well of the paint-filled tray and back to the roll-off area. Repeat this back and forth motion until the roller is sufficiently coated and just short of dripping.
  • To paint, begin in the corner, by making a “V” figure 1 ½ feet by 2 feet. Go back and fill in “V”, then continue working from dry into wet areas. While painting, maintain a wet edge and apply minimal pressure to the roller to ensure the roller does not dry out.
  • Once a section is complete, lightly back roll to lay off the paint and create a consistent finish across your project.
To CleanBlank space if empty.
  • Remove cover from frame immediately after use.
  • WATER-BASED PAINTS: Wash in warm soapy water, rinse, dry.
  • OIL-BASED PAINTS: Rinse in a recommended solvent. Wash in warm soapy water, rinse, dry. DO NOT SOAK IN WATER OR SOLVENT.

Read Application Instructions

Ready to get started?

 

Contact a BEHR PRO® rep

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
JOIN THE HOME DEPOT®
PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

Home Depot Pro XTRA royaly program
SIGN UP ON HOMEDEPOT.COM
Technical services

1-800-854-0133 ext. 2

Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

Never miss out on the latest deals and news from behr.