Email your BEHR PRO Pro Paint Specialist

Thank you for reaching out.
Your BEHR PRO TM Pro Paint Specialist will be in touch within 24 hours.
Your request was sent to the following BEHR PROTM Pro Paint Specialist.
direct:
Specialist Store Hours:
Monday - Friday
Sign up for My BEHR PRO to receive the latest news and special offers from BEHR.
Sign Up Now
Name*


Characters left:
512

Residential Painter

Commercial Painter

General Contractor

Property Manager

Other

Fields with an asterisk (*) are required. See our privacy policy
 

Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out


You are leaving the BEHR® Consumer website. You will be logged out.



Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

BEHR PREMIUM® Transparent Penetrating Oil Wood Finish No. 4000

BEHR PREMIUM® Transparent Penetrating Oil Wood Finish No. 4000

This easy to apply oil base transparent finish enhances the natural beauty of wood. It provides UV protection and is low maintenance. It also features a mildew resistant finish and is ideal for new to slightly weathered uncoated and unsealed exterior wood surfaces.

Finish
Provides a rich initial luster and is available in the colors of Clear, Cedar Naturaltone and Chocolate. *Not all colors available in all markets
Where to Use
For properly prepared new to slightly weathered, unsealed exterior wood surfaces (0-5 years exposure) such as; Decks, Railings, Shakes, Shingles, Siding, Fences, and Wood Patio Furniture.
Coverage
250-300 Sq.Ft. per Gallon

Latest Featured Reviews

READY TO USE, PROTECT FROM FREEZING.

WoodSmart by Behr

Learn about product selection, preparation, and how to's for your stain project with WoodSmart by Behr.

Start Woodsmart >>

Tools & Resources

Find a Rep

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

Recommended for properly prepared new to slightly weathered, unsealed exterior wood surfaces (0-5 years exposure) such as; Decks, Railings, Shakes, Shingles, Siding, Fences, and Wood Patio Furniture.

Usage Summary

Must Prep

Before Applying

Wood Finish

1 Coat

Application

Spread Rate

Covers 250-300

Sq. Ft.

Clean-Up

Mineral Spirits

or Paint Thinner

Preparation

Proper surface preparation is required.

  • For failing coatings or to remove loose wood fibers, use a product such as BEHR PREMIUM® No. 64 Wood Stain & Finish Stripper followed by BEHR PREMIUM No. 63 All-In-One Wood Cleaner to neutralize the wood.
  • When No. 64 is not needed, a product such as No. 63 MUST be used to remove mill glaze and clean the wood surface.
  • After using either No. 64 or No. 63, rinse thoroughly with a garden hose or pressure washer.
  • When rinsing with a pressure washer, use the broadest spray pattern while keeping the nozzle at least 24" away from the surface. Allow the area to dry at least 24 hours before coating.
  • Lightly sand to remove remaining wood fibers/fuzz.

Application

For best results, a pad applicator is recommended over large deck areas.

  • Must apply between 40-90˚F (4.5-32˚C). Avoid applying in direct sunlight or to hot surfaces.
  • Do not use if rain is expected within 24 hours. The surface must be completely dry before application.  
  • Intermix multiple containers to ensure color uniformity.
  •  Stir product occasionally throughout application.
  • Test product for penetration and color on a small hidden area before proceeding.
  • Use a natural bristle brush for areas requiring more accuracy.
  • Use of rollers should be limited to rough surfaces only. Use 3/8" nap or longer when appropriate.
  • A high-quality sprayer with a variable tip or an airless sprayer with a .013"-.017" tip (60 mesh filter) may be used.
  • If thinning is necessary for spray application, then use a VOC compliant paint thinner at a rate of up to 8 oz. per gallon.
  • Lightly saturate the surface and back-brush any excess finish. Be sure to eliminate puddling and evenly distribute the finish.
  • Maintain a wet edge when applying.  
  • Apply product end-to-end or to board lengths to prevent lap marks.
  • Avoid applying finish too heavily.
  • One coat application.
  • For optimum performance, coat all accessible sides.

Maintenance

  • When color has faded and water is readily absorbed by the substrate, prep/clean with a product such as BEHR PREMIUM No. 63, allow to dry, and apply a new/fresh coat of wood finish.
  • Product can be applied annually if needed.

Dry Time

  • Dry to touch after 2-4 hours depending on wood porosity.
  • 24-48 hours before foot traffic. 72 hours for full cure.

Disposal

  • For disposal of empty containers and unused product, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call Behr Pro Hotline Toll Free number at 1-877-776-3961 (U.S.A. only).

Meet your dedicated BEHR PRO Pro Paint Specialist

Behr and The Home Depot© have teamed up to create a service experience specifically designed for pro painters like you.

Enter your ZIP code to find the closest Pro Paint Store and Specialist.

We’re sorry. There are no BEHR PRO Pro Paint Specialists within 10 miles. Please try your search again.
We’re sorry. There was an error when searching for your nearest BEHR PRO Pro Paint Specialists. Please try your search again.

There’s a BEHR PRO Pro Paint Specialist near you!

Contact your Pro Paint Specialist today to find out how you can receive 20% OFF your first order of BEHR© Paints, Stains and Primers.

not your store?
Learn More

Email your BEHR PRO Pro Paint Specialist

Thank you — your email has been sent!

Thank you for reaching out.

Your BEHR PRO Paint Specialist will be in touch within 24 hours.


Your request was sent to the following BEHR PRO Paint Specialist:

,
Characters left:
My Role in Paint Selection (optional)
Characters left:
Close