Email your BEHR PRO Pro Paint Specialist

Thank you for reaching out.
Your BEHR PRO TM Pro Paint Specialist will be in touch within 24 hours.
Your request was sent to the following BEHR PROTM Pro Paint Specialist.
direct:
Specialist Store Hours:
Monday - Friday
Sign up for My BEHR PRO to receive the latest news and special offers from BEHR.
Sign Up Now
Name*


Characters left:
512

Residential Painter

Commercial Painter

General Contractor

Property Manager

Other

Fields with an asterisk (*) are required. See our privacy policy
 

Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out


You are leaving the BEHR® Consumer website. You will be logged out.



Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

BEHR® Solid Color House & Fence Wood Stain No. 30

BEHR® Solid Color House & Fence Wood Stain No. 30

Get all the best features of oil and latex with BEHR's Solid Color House & Fence Wood Stain. This exterior formula creates a durable film that resists cracking and peeling on your home's vertical surfaces. It's available in more than 1,600 custom and computer-matched colors, and is also great on stucco, brick and cement siding.

 

See Our Selection of Solid Colors.

Finish
Provides a film that is highly resistant to cracking, peeling, blistering, weathering, chalking & erosion.
Where to Use
Smooth or rough sawn exterior vertical wood surfaces such as: Plywood, Fences, Patio Covers, Shingles, Shakes, Siding, Laminates, Barns and Masonry & Stucco Surfaces.
Coverage
1st Coat 200-400 Sq.Ft.; 2nd Coat 250-500 Sq. Ft.

Latest Featured Reviews

ALWAYS ADD TINTING COLORANTS BEFORE USING.

WoodSmart by Behr

Learn about product selection, preparation, and how to's for your stain project with WoodSmart by Behr.

Start Woodsmart >>

Tools & Resources

Find a Rep

Enter your Zip/Postal Code to find the nearest Home Depot

SDSs, Tech Data & Certifications

Where to Use

Recommended for smooth or rough sawn exterior vertical wood surfaces such as: Plywood, Fences, Patio Covers, Shingles, Shakes, Siding, Laminates, Barns and Masonry & Stucco Surfaces. DO NOT USE ON HORIZONTAL SURFACES SUBJECT TO FOOT TRAFFIC. Use BEHR PREMIUM Solid Color Waterproofing Stain & Sealer.

Usage Summary

Must Prep
Before Staining

2 Thin Coats 
Recommended

1st Coat
200-400 Sq. Ft
2nd Coat
250-500 Sq. Ft.

Soap & Water
Clean-Up

Preparation

The following steps and products are recommended for best results.

  • Use a product such as BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper to remove loose wood fibers, latex, oil-based and 100% acrylic coatings on new or weathered wood.
  • BEHR PREMIUM® NO. 63 All-In-One Wood Cleaner MUST be used following NO. 64 to clean, brighten & neutralize wood.
  • When NO. 64 is not needed, use a product such as NO. 63 to clean and brighten the wood surface and to remove light to medium exterior stains caused by mold, mildew, algae & fungus.
  • Rinse thoroughly and allow to dry before coating. On new wood, use a product such as NO. 63 to remove mill glaze and open the pores of the wood. Lightly sand to remove remaining wood fibers/fuzz.

Application

  • Must apply between 40-90˚F (4.5-32˚C). Do not use if rain is expected within 24 hours. The wood surface must be completely dry before application.
  • No primer needed on most woods. However, Redwood, Cedar, Cypress and other “bleeding” woods contain water soluble extractives which may cause discoloration of white and pastel colors; therefore prime the above type woods with one coat of a product such as BEHR PREMIUM PLUS® NO. 436 Exterior Multi-Purpose Primer & Sealer.
  • See label for additional instructions. Intermix multiple containers to ensure color uniformity
  • Apply with a nylon/polyester brush. On rough-sawn or textured wood apply with a 3/4” (19 mm) long nap roller or high quality airless sprayer.
  • For airless spraying use a .015 - .019" tip. Pump Sprayer not recommended. Always back-brush or back-roll during all application methods.
  • Keep a wet edge to reduce lapping and help control color uniformity.
  • Over application of stain will lead to surface failure including peeling and cracking. Avoid applying stain too heavily.
  • Two coats may be necessary for complete hiding. Apply a thinner second coat after the first coat has thoroughly dried.

Disposal

  • For disposal of empty containers and unused product, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call Behr Pro Hotline Toll Free number at 1-877-776-3961 (U.S.A. only).

Meet your dedicated BEHR PRO Pro Paint Specialist

Behr and The Home Depot© have teamed up to create a service experience specifically designed for pro painters like you.

Enter your ZIP code to find the closest Pro Paint Store and Specialist.

We’re sorry. There are no BEHR PRO Pro Paint Specialists within 10 miles. Please try your search again.
We’re sorry. There was an error when searching for your nearest BEHR PRO Pro Paint Specialists. Please try your search again.

There’s a BEHR PRO Pro Paint Specialist near you!

Contact your Pro Paint Specialist today to find out how you can receive 20% OFF your first order of BEHR© Paints, Stains and Primers.

not your store?
Learn More

Email your BEHR PRO Pro Paint Specialist

Thank you — your email has been sent!

Thank you for reaching out.

Your BEHR PRO Paint Specialist will be in touch within 24 hours.


Your request was sent to the following BEHR PRO Paint Specialist:

,
Characters left:
My Role in Paint Selection (optional)
Characters left:
Close