BEHR PREMIUM® Protector & Waterproofer

• Spread Rate 250 Sq. Ft

• 24-48 Hr. to cure

• Soap & Water Clean-Up

• Protect from Freezing

Horizontal and Vertical Uncoated, Porous Concrete and Masonry surfaces such as: Concrete Block, Pavers, Stucco, Brick, Unglazed Tiles, Exposed Aggregate, Concrete, Unpolished Natural Stones such as Sandstone. Not recommended for use on areas subject to hydrostatic pressure such as basement walls or floors.

CAUTION: Sealed surfaces may become slippery when wet. Use caution when walking on surface when moisture is present.

Preparation† (Proper surface preparation is required.)

• All surfaces must be clean, sound, dry and free of any dirt, oil and grease.
• New concrete must cure for a minimum of 30 days.
• Use a paint stripper (follow all manufacturer’s label instructions) to remove any previous coatings or sealers.
• Clean and etch surface using a product such as a muriatic acid etcher (follow all manufacturer’s label instructions) to achieve a textured profile similar to 150 grit sandpaper.
• Wipe your fingers over the clean, dry floor to check for dust or powder. Ensure there is no residue on your fingers that may have been left from the etcher.
• If residue is found, rinse the surface to remove residue. Allow the surface to dry completely.
• Test: Sprinkle a few drops of water onto the surface.
• If water is quickly absorbed and the surface feels like 150 grit sandpaper, the surface is ready.
• If not, re-etch and follow all manufacturer’s label instructions.

Application

• DO NOT THIN.
• Stir or shake before applying.
• Use product when temperature is between 50–90° F (10-32° C).
• Do not apply in direct sunlight, on wet surfaces, or if rain/heavy dew is expected within 24 hours.
• Apply using a high-quality pump sprayer, 1/4” - 3/8” nap roller, synthetic brush, or a pad applicator until saturated.
• DO NOT ALLOW PRODUCT TO POOL. Remove any puddles by spreading product to drier areas, back rolling using a nap roller, or by wiping up excess with a clean cloth before it dries to touch.
• On vertical surfaces, apply from the bottom up and saturate well. Avoid dripping and clean up any excess with a clean cloth before it dries to touch.
• Improper surface preparation, insufficient drying, or over-application can result in a milky white appearance and/or film tackiness.

Dry Time

• Once dried, rough, vertical surfaces may be coated with an oil or latex-based paint or primer (follow all manufacturer’s label instructions).
• Do not paint dense concrete surfaces, such as horizontal concrete floors, after applying this product.

Disposal

• Clean all equipment immediately with warm, soapy water.
• Properly dispose of all soiled rags and protect unused product from freezing.
• For disposal of empty containers and unused paint, contact your household refuse collection service.

LIMITED WARRANTY: For one year from the date of purchase, Behr Paint Company warrants to the original consumer purchaser, (1) that the product meets Behr Paint Company manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.