How to Use Behr CoverPro™ Roller Covers

Achieve efficient, high-quality painting with Behr CoverPro™ roller fabric. This high-performance fabric enables you to paint farther and faster* while delivering a remarkably smooth finish with advanced shed-resistance.

*When compared to rollers of woven construction using premium paints

For Best Results:

Before first use, it is essential to properly prepare your roller for optimal painting performance.

Suggested Tools & Supplies

Roller Frame
Tray & Liner
Extension Pole
Painter’s Tape
Drop Cloth
Paint Key
Stir Stick

PREPARATION

Step 1: TAPE-OFF ROLLER
Use tape to remove any loose fibers from the roller to ensure a smooth and shed resistant finish.
Step 2: PRE-WET
Pre-wet roller to activate and prime fabric for loading paint. For water-based coatings, pre-wet with water. For oil-based coatings, pre-wet with manufacturer’s recommended solvent.
Step 3: REMOVE EXCESS MOISTURE
Before loading paint, spin out excess moisture so that roller is just slightly damp.

APPLICATION

Step 1: LOAD WITH PAINT
Dip the roller into the well of paint tray, then roll it over the ribbed area to remove excess paint and avoid drips. Repeat this process for about 30 seconds until the roller is evenly saturated.
Step 2: PAINT
Paint at shoulder height with long vertical strokes. Roll with moderate pressure until paint stops releasing.
Step 3: RELOAD & REPEAT
Reload roller with paint and overlap each new section with the previous one to create a smooth, even finish.
TIP:
If you need to take a short break during your project, wrap the roller tightly in plastic and place it in a cool area to keep the paint from drying out until you're ready to continue.