BEHR® SIMPLE POUR LID & SPOUT IS AN HONOREE OF THE FAST COMPANY 2020 INNOVATION BY DESIGN AWARDS IN THE HOME CATEGORY.
...and goodbye to messy pouring. The BEHR® Simple Pour lid comes with an attachable spout for a more precise pour, every time.
See how the Simple Pour Lid & Spout allow you to pour with ease in this quick video tutorial.
If you would like to see the step-by-step instructions, please refer to the "How To Use" section below.
The BEHR® Simple Pour Lid & Spout were designed with your painting convenience in mind.
EASY TO USE POUR SPOUT
Notched end (1) fits onto cap for easier twist off. Spout wings (2) help align and screw spout to cap opening.
MULTIPLE WAYS TO OPEN
Simply twist to remove the cap (3). You can also use a traditional paint key (5) to open the full lid.
RUST PROOF LID
The eco-friendly can and lid (4) are made out of 100% recycled plastic material.
FRESHER PAINT LONGER
Once your painting project is complete, clean the spout, wipe excess paint from the cap opening and reseal the paint can by replacing the twist cap or lid, helping the paint remain fresher longer.
Make a quarter-turn counter-clockwise to remove the cap.
Or - use the notched end of the spout as a tool to remove cap, turning counter-clockwise.
The Simple Pour Spout threads onto the cap with a clockwise turn. Use 2 plastic wings on side of spout to properly tighten.
Pour paint using any side of the spout and slowly bring paint can back up to its upright position to avoid any drips.
After pouring the paint, use a paper towel or cloth to turn the spout counter-clockwise and remove the spout. Clean spout and save for next use.
Wipe off any excess paint from the rim of the cap opening and reseal the cap by turning it clockwise.
If needed, entire lid can be removed with a paint key or screwdriver. Remember to always wipe excess paint from the rim of the can before tapping the lid back in place with a rubber mallet or hammer.