BEHR PREMIUM Spray Paint

Avg. Rating:

BEHR PREMIUM Spray Paint features an enhanced formulation that combines paint and primer in a single can, delivering a premium, durable finish. Designed for both indoor and outdoor use, BEHR PREMIUM Spray Paint can be used on wood, metal, plastic, cast stone and wicker. Weather and corrosion-resistant, it delivers a reliable, long-lasting finish. The unique, ergonomic shape of the BEHR PREMIUM Spray Paint can and its comfort tip deliver a superior spray experience that fights fatigue so you can create a smooth finish every time.

Can of Behr Premium Spray Paint Gloss, Adored Blue

Finish

Gloss, Satin or Matte/Flat Finish

Best For Use In

Designed for both indoor and outdoor use. BEHR PREMIUM Spray Paint can be used on wood, metal, plastic, cast stone, and more

Coverage

11-15 sq. ft. per can

PRODUCT USAGE

Use on properly prepared surfaces such as:

  • Wood
  • Metal
  • Plastic
  • Cast stone
  • Wicker

Preparation

  • The surface must be clean, free of dust, grease,wax, peeling paint, mold or mildew. If washing is necessary, use a non-soapy detergent or a TSP substitute. Rinse well and allow to dry.
  • †Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface. Sanding or removal of paint containing lead is hazardous.
  • * Glossy Surfaces: For maximum adhesion, scuff sand the surface thoroughly before painting.

†WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Center at 1-800-424-LEAD or log on to www.epa.gov/lead.

empty-paragraph

Read More

Application

  • Eye protection is recommended.
  • For best results, use at room temperature. Cover adjacent areas to protect from overspray.
  • Shake can vigorously for 1 minute after mixing ball begins to rattle and often during use. Hold can upright, moving from side-to-side while spraying lightly and evenly about 12" from the area being painted. 2 to 3 thin coats produce best results.
  • Apply thin coats to avoid runs and sags. Recoat within 1 hour or after 24 hours.
  • Dries to touch in 15-30 min. Cooler temperatures or higher humidity may prolong drying time.
  • Use Behr® Primer for enhanced performance on porous surfaces or rough wood.

Read More

Clean-up & Disposal

  • Clear spray valve immediately after use by turning can upside down and spraying until only clear gas is released. If spray nozzle becomes clogged, remove and clean.
  • Do not stick pins or wire into can opening.
  • Clean fresh overspray with mineral spirits or paint thinner. Remove dried paint with paint remover, but test small area first to ensure paint remover does not damage substrate
  • Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service.

Read More

Read More

Reviews

WARRANTY

For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
Compare
BLACK
BLACK
What sheen do I need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep and pre-treat wood prior to any stain project.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep and pre-treat wood prior to any stain project. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when stripping is needed.
$0.00
The Home Depot logoSold Exclusively at The Home Depot