BEHR^® Urethane Alkyd Semi-Gloss Enamel

Where to UseBlank space if empty.

Properly prepared Interior/Exterior metal & wood surfaces. Ideal for Doors, Trim, Molding, Cabinetry, Plaster, Masonry, Cinder Block, Well-bonded Wallpaper, Brick, Stucco, Aluminum and Wrought Iron. Do not use on horizontal surfaces subject to foot traffic.

Usage SummaryBlank space if empty.

PreparationBlank space if empty.

Proper surface preparation is required

• Allow new stucco, plaster and masonry to cure for 30 days.
• For interior and exterior surfaces, remove dirt, oil and grease stains with a product such as BEHR PREMIUM® NO. 990 Concrete & Masonry Degreaser & Cleaner.
• Remove mildew stains with a mildew stain removing product.
• Remove all loose and peeling paint; scuff sand glossy surfaces; caulk; repair imperfections and sand smooth.
• For exterior surfaces, power wash to remove chalk.
• Etch galvanized metal with a product such as BEHR PREMIUM NO. 991 Concrete & Masonry Cleaner & Etcher. Follow all label instructions.

PrimeBlank space if empty.

• Interior: On interior surfaces with heavy stains, galvanized metal or wrought iron, use a product such as BEHR PREMIUM PLUS® NO. 75 All-In-One Primer & Sealer.
• Exterior: On exterior surfaces with heavy stains, wood or metal, use a product such as BEHR PREMIUM PLUS NO. 436 Multi-Surface Primer & Sealer. Follow all label instructions.

ApplicationBlank space if empty.

• DO NOT THIN.
• Stir before and during application. When working with more than one can of the same product, intermix to ensure color uniformity.
• Use adequate ventilation during application and drying process.
• Certain colors may require 2 or more coats to achieve complete hide and coverage.
• Use product when air and surface temperature are 50-90˚F (10-32˚C).
• Apply a thin coat using a high quality synthetic brush, 1/4"-3/8" nap roller or an airless sprayer (.013"-.017" spray tip).
• NOTE: If touch-up is necessary, same application method is recommended.

Dry TimeBlank space if empty.

• Longer dry time required in cooler temperatures and higher humidity.
• Wait at least 7 days before rinsing or cleaning the surface with a mild, non-abrasive detergent.

DisposalBlank space if empty.

• Properly dispose of all soiled rags and protect unused product from freezing.
• For disposal of empty containers and unused product contact your household refuse collection service.