BEHR PREMIUM™ Cabinet, Door & Trim Semi-Gloss Enamel
BEHR PREMIUM Cabinet, Door & Trim Interior/Exterior Semi-Gloss Enamel offers excellent flow & leveling and dries to a hard, durable finish. Its outstanding block resistance allows for quick return to service, making it ideal for use on cabinets, trim, doors, molding and baseboards. This product can also be used on other properly prepared and primed substrates, such as drywall, masonry and metal.
Finish
Semi-Gloss Finish
Best For Use In
Recommended for interior or exterior wood, drywall, masonry, vinyl, aluminum, and other properly prepared and primed surfaces. Ideal for cabinets, doors, trim, molding, windows & shutters.
Coverage
Up to 400 Sq. Ft. per Gallon
PRODUCT USAGE
-
2 Coats Required
for Optimal Durability -
Spread Rate
Up to 400 Sq. Ft. Coverage -
Dry Time
1 Hr Dry to Touch
2 Hr Recoat -
Clean Up
Soap & Water
Interior or exterior wood, drywall, masonry, vinyl, aluminum, and other properly prepared and primed surfaces. Ideal for cabinets, doors, trim, molding, windows & shutters.
Surface Preparation† (Proper Surface Preparation is Required.)
- All surfaces must be clean, sound, dry and free of any dirt, oil and grease stains.
- Remove mildew stains with a mildew stain removing product.
- Interior Wood Trim, Doors & Cabinets: Remove all loose and peeling paint; scuff sand glossy surfaces; caulk and repair imperfections. Sand all wood surfaces in the direction of the wood grain to the desired smoothness. Remove all dust from sanded surfaces with a damp, lint-free cloth.
- Exterior Wood: Use a product such as BEHR PREMIUM® No. 63 All-In-One Wood Cleaner. Thoroughly rinse the treated surfaces with clean water and allow to dry before any paint application.
- Interior/Exterior Concrete & Masonry: Allow new stucco, plaster and masonry to cure for 30 days. Use a concrete & masonry degreaser & cleaner to clean and prepare the surface. Powerwash to remove chalk on exterior surfaces.
- Interior/Exterior Metal: Etch galvanized metal.
- For primed surfaces, sand primer coat prior to topcoating for best results.
Read More
Prime
- Priming is recommended over all properly prepared coated or uncoated surfaces.
- For all interior surfaces, use a product such as BEHR® Kitchen, Bath & Trim Interior Stain-Blocking Primer & Sealer No. 75.
- For all exterior surfaces, use a product such as BEHR Acrylic-Alkyd Enamel Undercoater No. 437 or BEHR Multi-Surface Interior/Exterior Stain-Blocking Primer & Sealer No. 436.
- Follow all label instructions.
Read More
Application
- DO NOT THIN.
- Stir before and during application.
- When working with more than one can of the same product, intermix to ensure color uniformity.
- Certain colors may require 2 or more coats to achieve complete hide.• Apply when air temperature is between 50–90° F.
- Brush: Apply a thin coat using a high quality synthetic brush. For best results, apply paint with a high quality 100% Nylon brush.
- Roller: Use a high quality 1/4” nap roller cover.
- Airless Sprayer: .013”–.015” spray tip, 60 mesh filter.
- OPTIONAL: In between coats, sand lightly with 320-400 grit sand paper.
- NOTE: If touch-up is necessary, same application method is recommended.
Read More
Dry Time
- Darker colors may require additional dry time. Longer dry time required in cooler temperatures and higher humidity.
- Cabinets, doors and windows can be closed as early as 2 hours after final topcoat.
- After 2 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent. Dry paint film is mildew resistant.
- Do not use on floors
Read More
Disposal
- Properly dispose of all soiled rags.
- For disposal of empty containers and unused product, contact your household refuse collection service.
- To reduce waste, consult with your retailer or an online paint calculator to determine the correct amount of paint to purchase.
Read More
Read More
Reviews
Often Bought Together
How-To
Find step-by-step instructions in our how-to articles and videos.
MSDS AND DATA SHEET
BEHR PREMIUM™ Cabinet, Door & Trim Semi-Gloss Enamel
See Full MSDS, Product Data & SafetyWARRANTY
For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
