Transparent Log Home Gloss Finish | BEHR PREMIUM®

CUSTOMIZE & BUY

SELECT PRODUCT

SELECT PAINT TYPE

SELECT COLOR

SELECT COLOR CODE

BLACK

SELECT FINISHWhat sheen do I need?

SELECT SIZE How much paint do I need?

QTY

ESTIMATED SUBTOTAL $0.00

Product price is estimated. Pricing could change based on your local Home Depot pricing.

Sold Exclusively at The Home Depot

PRODUCT USAGE

Must Prep
Before Applying
Wood Finish

2 Coats
Required

1st Coat
200-400 Sq. Ft
2nd Coat
300-400 Sq. Ft.

Soap & Water
Clean-Up

Where to Use

“For Wood Substrates Only” Exterior wood surfaces such as: Log and Timber Frame Homes, Siding, Fencing and Railings. Do not use on horizontal surfaces subject to foot traffic.

Preparation

The following steps are recommended for best results.

Use a product such as BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper to remove loose wood fibers, latex, oil-based and 100% acrylic coatings on new or weathered wood.
BEHR PREMIUM® NO. 63 All-In-One Wood Cleaner MUST be used following NO. 64 to clean, brighten & neutralize wood.
When NO. 64 is not needed, use a product such as NO. 63 to clean and brighten the wood surface and to remove light to medium stains caused by mold, mildew, algae & fungus. On new wood, use a product such as NO. 63 to remove mill glaze and open the pores of the wood.
Rinse thoroughly and allow to dry before coating.
Lightly sand any remaining wood fibers/fuzz.

Application

Must apply between 40-90˚F (4.5-32˚C). Do not use if rain is expected within 24 hours.
The wood surface must be completely dry before application. Intermix multiple containers to ensure color uniformity. DO NOT THIN PRODUCT.
Stir product occasionally throughout application. Test product for color on a small hidden area before proceeding.
Use a 3/8" nap roller or nylon/polyester bristle brush. Airless sprayer with a .015 - .019" tip is recommended for experienced applicators only.
Maintenance re-coating may be achieved by applying 2 coats at a spread rate of 200-400 sq. ft. (18-37 m2) per gallon over a clean, sound surface.
Clean and recoat surface when finish no longer has gloss or luster or if the film is broken.
Thoroughly seal the ends of the boards and all porous areas such as knots with several thin coats.
Maintain a wet edge when applying. Back-brush during all application methods. Apply product end-to-end or to board lengths to prevent lap marks.
Over application of finish will lead to surface failure including peeling and cracking. Avoid applying finish too heavily. Avoid applying product in direct sunlight or on to hot surfaces.

Dry Time

Dries to touch in 8-12 hours. Recoat after 24 hours. Cool temperatures and/or high humidity will require additional drying time.

Disposal

For disposal of empty containers and unused product, contact your household refuse collection service.

How-To

Find step-by-step instructions in our how-to articles and videos.

More How-to's

WARRANTY

For one year from the date of purchase, Behr Process Corporation warrants to the original residential consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product as described on this label when applied according to the label instructions and specifications. In the event that this product proves to be defective within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Reviews

BEHR PREMIUM ® Transparent Log Home Gloss Finish is rated 4.0 out of 5 by 7.

Rated 4 out of 5 by Hope33 from nice wood finish This finish is wonderful, great coverage and worth every penny!

Date published: 2018-11-27

Rated 5 out of 5 by Montann from BEST STAIN EVER We have a beautiful chalet home in the woods of Northwest Montana. Our siding is cedar. We use this exclusively. We love the LOG HOME product!

Date published: 2016-11-03

Rated 5 out of 5 by JIMMY JACK from NICE COLOR GREAT WATERPROOFING RICH COLOR BRINGS OUT WOODS DEPTH RICH

Date published: 2020-08-12

Rated 5 out of 5 by MediAnn from BEST Stain Ever !! We used this wonderful stain on all the structures my husband built on our five acres here in Montana, 23 years ago, and just finished re coating all of them. We love how it has held up all these years and the many compliments we have received about our beautiful buildings. We would not use anything else!

Date published: 2020-06-19

BEHR PREMIUM ® Transparent Log Home Gloss Finish Reviews - page 2

BEHR PREMIUM® Transparent Log Home Gloss Finish

Reviews

BEHR PREMIUM^® Transparent Log Home Gloss Finish