CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
Compare
BLACK
BLACK
What sheen do I need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep and pre-treat wood prior to any stain project.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep and pre-treat wood prior to any stain project. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when stripping is needed.
$0.00
The Home Depot logoSold Exclusively at The Home Depot

BEHR® FAST-DRYING WATER-BASED POLYURETHANE

Avg. Rating:
false

BEHR Fast Drying Water-Based Polyurethane is a clear protective finish that shields your interior wood surfaces that are stained with BEHR Water-Based Wood Stain. This durable polyurethane is designed to prolong the life of your wood surface and create a smooth, lasting finish. This product enhances the look and color of your wood surface, allowing its true beauty to shine through. Multiple sheens are available depending on your desired look.

See Our Selection of Water-Based Wood Stains and Finishes


Finish

Available in Matte, Satin, Semi-Gloss, and Gloss Finish

Best for use in

Properly prepared interior bare or stained wood surfaces such as furniture, moldings, cabinets, trim, doors and residential hardwood floors.

Coverage

125 Sq. Ft./ Qt.


311622985
PRODUCT USAGE
Icon of hand sanding surface with sanding block

Prep
Before Use

Icon of paint brush applying paint

2 Coats Required
3 Coats if Desired

Icon representing length and width dimensions to determine square footage

Spread Rate: 
125 Sq. ft./Qt.

Icon of cleaning paint brush under water faucet

Clean-Up
Soap & Water

READY TO USE. PROTECT FROM FREEZING.

Properly prepared interior bare or stained wood surfaces such as furniture, moldings, cabinets, trim, doors and residential hardwood floors.

CAUTION: Top coated surfaces may be slippery when wet.

Read More

The following steps are recommended for the best results.

  • For refinishing, remove all wax or cleaner build-up with a wax stripper or degreaser prior to sanding.
  • Sand all surfaces in the direction of the wood grain to desired smoothness
  • DO NOT USE steel wool. 
  • Remove all dust from sanded surfaces and clean with a tack cloth.
Read More

  • Do not shake or thin. 
  • Do not apply in direct sunlight or in temperatures below 55°F (10°C) or above 90°F (32°C).
  • Stir thoroughly prior to and during use.
  • If wood stain color is desired, apply BEHR® Wood Stain. Follow all label instructions.
  • Using a high-quality nylon/polyester bristle brush, dip approximately an inch into the can, gently tapping it against the inside to remove any excess.
  • Apply a thin, even coat following the direction of the grain making sure to maintain a wet edge.
  • To minimize the brush marks and bubbles after staining application, tip off the surface by holding the brush at a 45-degree angle and lightly run the bristles over the entire length of the wood.
  • Floor Application: use a synthetic pad applicator or bristle brush and maintain a wet edge to avoid lap marks.
  • For maximum durability, 3 coats are required.
  • Do not puddle, over-brush or overlap finishes.
  • Sand lightly between coats with fine sandpaper.
  • Remove all dust prior to applying additional coats.
Read More

  • Dries to touch in 1 hour.
  • Sand or Recoat: 1 hour.
  • After the final coat, allow 12 - 24 hours before light use.
  • Fully cured: 3 days after the final coat.
Read More

  • For disposal of empty containers and unused product, contact your household refuse collection service
Read More

Reviews

BEHR ® Fast-Drying Water-Based Polyurethane No. B8106 is rated 4.2 out of 5 by 268.
Rated 5 out of 5 by from Great Product! I bought this to use on a brand-new outdoor potting table and it worked great! I lightly sanded any rough edges and lightly wiped the table down with a slightly damp cloth. I allowed this to dry overnight, then applied the product outdoors with a paint brush. It goes on clear with a slightly milky look to it. I applied 2 light coats to the entire potting table and it all dried with a clear, matte finish to it. I was able to complete the project in one day. If you didn't know I had applied it to the wood, you wouldn't know the wood had been treated with anything. Very pleased with how it turned out.
Date published: 2019-05-22
Rated 5 out of 5 by from Fence Staining I used the Cedar color. It went on easy with a brush and didn't show overlapping strokes when done. This fence was never treated in the last 25 years since it was installed. After cleaning the Pacific NW green tint of algae off of the cedar fence and letting it dry, this product made my fence look like new again.
Date published: 2019-01-31
Rated 5 out of 5 by from Transparent Waterproofing Wood Finish Bought this product to use on kitchen cabinets, especially where boiling liquids above the stove dampen the cabinets. After cooking on the stove top, I just wipe off the cabinets with a clean towel. The finish holds up wonderfully and still look beautiful with no peeling or damage to the wood!
Date published: 2019-01-30
Rated 5 out of 5 by from Exceeded expectations I stained a 60 foot wooden fence (Pine). I originally attempted to use a pump sprayer but it was too messy so I used a 3 inch brush. I applied 2 coats and it looks better than I expected. The second coat went on much faster than the first coat because the fence was new wood. I estimate it took 16 - 17 hours to apply both coats. The finished product was well worth the labor that went into completing the project.
Date published: 2018-07-02
  • y_2021, m_10, d_19, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_268
  • loc_en_US, sid_10102051000100130-W, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_behr
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 30ms
  • REVIEWS, PRODUCT
Often Bought Together
BEHR<sup>®</sup> WATER-BASED PRE STAIN WOOD CONDITIONER
BEHR® WATER-BASED PRE STAIN WOOD CONDITIONER
Learn More
BEHR<sup>®</sup> FAST-DRYING WATER-BASED WOOD STAIN
BEHR® FAST-DRYING WATER-BASED WOOD STAIN
Learn More
How-To

Find step-by-step instructions in our how-to articles and videos.

MSDS AND DATA SHEET

WARRANTY

For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. In the event this product proves to be defective within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Never miss out on the hottest deals and latest news from BEHR.

Please enter email address.
Please enter email address.