How to apply BEHR PREMIUM® Solid Color Concrete Stain
This durable, weather-resistant, solid color stain is designed to help protect and enhance both exterior and interior, vertical and horizontal concrete surfaces.
For best results:
Be sure the surface is properly prepped before applying the solid color concrete stain.
If you have a new or uncoated surface, please refer to our how-to: Preparation of Uncoated Concrete for Paints & Stains.
If you have a previously coated or weathered surface, please refer to our how-to: Preparation of Coated Concrete for Paints & Stains.
Tools & supplies
- Bucket
- Broom (Stiff Bristle)
- Brush (2"-2½")
- Bucket Grid
- Chemical Resistant Gloves
- Extension Pole
- Hose
- High Pressure Nozzle
- Mop
- Paint Can Opener
- Paint Tray
- Paint Tray Liner
- Protective Apparel
- Pump Sprayer
- Rags
- Roller Cover
- Roller Frame
- Stir Stick
Step-by-step process
How to Coat a Concrete Surface
Step 1
Once the surface is properly prepped, you are ready to apply the concrete stain. Make sure to stir the stain before applying. Apply a thin, even coat using a 3/8" nap roller cover, pad applicator or nylon-polyester brush.
Step 2
Cut in with your brush to coat the perimeter of your surface, next to the wall.
Step 3
Apply the stain, using long even strokes. Apply in one direction to avoid lap lines. Apply the stain when air and surface temperatures are between 50-90 degrees F. Since concrete varies in texture and porosity, 2 coats may be required for uniform appearance.
TIP: The spread rate on a rough surface is approximately 400-500 sq. ft and on a smooth surface, 500-600 sq. ft.
Step 4
Allow the first coat to dry for at least 2-4 hours before re-coating, if necessary. Apply the second coat in a criss-cross direction for uniformity of appearance.
TIP: Use soap and water for any clean-up.
Step 5
The surface must be fully cured before use.
TIP: If necessary, corrugated cardboard may be placed under auto tires after 72 hours.