BEHR PREMIUM® Concrete Crack Filler

• Fills Cracks Up to 2" Wide
• Leave Uncoated or Apply Topcoat
• 1-Hour Dry Time For Hairline Cracks Up to 1/8" Wide
• Store in a Dry Location

For use in horizontal cracks found on cementitious surfaces such as patios, driveways, garages, pool decks, and walkways to improve the appearance of the cracked surface. Ideal for hairline cracks and cracks up to 2" wide.

Limitations

• Results will vary depending on substrate color and crack size.
• Not for use to repair structural damage or for use on vertical surfaces.
• Horizontal concrete or masonry surfaces may shift due to factors such as temperature changes, heavy loads, ground settlement, and water/moisture. Periodic touch-ups may be needed to address these movements.
• For surface movement on top coated surfaces, sanding or stripping may be required before touching up with Behr Premium Crack Filler for a uniform finish. Reapply topcoat once crack filler has cured.
• Using a transparent topcoat over BEHR PREMIUM Concrete Crack Filler may cause visible darkening compared to the surface.
• Shelf life under normal conditions is two years unopened.

Preparation

• Proper surface preparation is required

• All cracks must be clean, sound, dry, and free of any dirt or debris. Rinse cracks with a garden hose or a power washer and allow to fully dry.
• If planning to topcoat, follow surface preparation outlined on the manufacturer’s label instructions.
• For best topcoat results, use NO. 880 BEHR PREMIUM® Concrete Bonding Primer after BEHR PREMIUM Crack Filler has fully cured.

Application

• For best results and optimal dry time, apply when air, material and surface temperatures are between 50° F and 90° F. Temperatures below 50° F extend dry time beyond 24 hours. Do not apply if rain or heavy dew is expected within 24 hours. NOTE: If the surface is hot to the touch, it should be considered too hot to apply this product.
• Shake bottle well, remove red cap, and cut a small opening on the spout.
• Pour into crack fully filling all voids. Do not overfill as it may be hard to remove any residual filler that cures around the surface.
• For deep cracks, an alternative filler may be used as a base layer, then top off with BEHR PREMIUM Concrete Crack Filler.
• Carefully level off and remove any excess material leaving a flush surface. Example tools to use are small brushes, putty knifes, etc. If surface is clean, then the excess dry material can be saved and reused.
• Use a spray bottle to lightly mist with clean water and fully saturate. Avoid puddling.
• Large and deep cracks may be prone to slight shifting upon misting. A second fill and mist may be necessary to get a flush uniform finish.

Dry Time

• Allow the BEHR PREMIUM Concrete Crack Filler to fully dry before applying an optional topcoat or subjecting to any traffic.
• Allow 1-hour dry time for hairline cracks up to 1/8" wide.
• Longer dry time may be required in cooler temperatures and higher humidity, and for larger cracks

Storage

• Attach red cap back to bottle for storage.

• Store in a dry, well-ventilated area away from sources of heat, moisture, combustible materials, and incompatible substances. Keep container tightly closed when not in use.

• Shake well before reuse.

LIMITED WARRANTY: For one year from the date of purchase, Behr Paint Company warrants to the original consumer purchaser, (1) that the product meets Behr Paint Company manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.