BEHR MARQUEE^® Advanced Stain-Blocking Ceiling Paint & Primer

Features you'll love

• Advanced performance and stain blocking
• Spattering resistance
• Antimicrobial-mildew resistant finish

Where to Use

Properly prepared coated and uncoated Interior Ceilings. For water stains, apply MARQUEE Ceiling Paint as a primer to the stained area prior to topcoat.

Product Specs

• 1 HR Dry Time. 2 HR Recoat Time.
• Up to 400 SQ FT. Coverage per Gallon
• Soap & Water Clean-Up
• Protect from Freezing

Product Usage

Preparation

• Properly prepare and clean all surfaces.
• Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry.
• Remove mildew stains with a mildew stain remover.
• Scuff sand glossy surfaces and repair imperfections.
• Remove all dust with a damp cloth, allow to dry.
• Allow new stucco, plaster and masonry to cure for 30 days before painting.
• Darker colors may require additional dry time between coats. ​

Prime

• Lock in water stains with MARQUEE Ceiling Paint as a spot primer.
• For heavy stains, test for stain bleed-through by applying MARQUEE Ceiling Paint to a small section.
• If the stain bleeds through, spot prime with another coat to the stained area and test again before topcoating.
• If bleeding continues, a longer dry time is needed before topcoating.

Application

• Apply when air and surface temperatures are between 50-90°F (10-32°C).
• Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
• Use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015 - .019" spray tip, 60 mesh filter).
• Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
• Fully saturate roller for best coverage.
• Untinted bases and colors outside of the MARQUEE Interior One-Coat Color Collection may require more than one coat to achieve complete hide and a uniform finish.
• Darker colors may require additional dry time between coats. Cooler temperatures or higher humidity may prolong drying time.
• After 2 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
• Dry paint film is mildew resistant.
• Do not use on floors.

Disposal

• For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Safety and Data Sheets

Warranty

LIFETIME LIMITED WARRANTY: Behr Paint Company warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.