BEHR® Barn & Fence Paint
An advanced exterior paint combining the best features of oil and latex for superior color retention, adhesion, penetration and durability.
Finish
Flat
Best For Use In
Smooth or rough-sawn exterior vertical wood surfaces such as Plywood, Fences, Shingles, Shakes, Siding and Laminates.
Coverage
200-500 Sq. Ft per Gallon
PRODUCT USAGE
-
2-3 HR Dry Time
6-8 HR
Recoat Time -
200-500 Sq. Ft.
Coverage per Gallon -
Soap & Water
Clean-Up -
Protect
from Freezing
Smooth or rough-sawn exterior vertical wood surfaces such as Plywood, Fences, Shingles, Shakes, Siding and Laminates. Not for use on horizontal surfaces subject to foot traffic. Dry film will not harm livestock.
Proper surface preparation is required
- Remove stains caused by mold and mildew with a mold and mildew stain removing product.
Previously painted, stained or clear sealed wood
- Sand all glossy surfaces.
- If surface is in good condition, apply directly over clean, dry surface.
- If the latex or oil-based finish has started to crack, peel or flake, use a product such as BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper on wood to remove the coating. Rinse thoroughly.
- Follow with a product such as BEHR PREMIUM NO. 63 All-In-One Wood Cleaner. Scrub, rinse, and allow to dry completely.
New, weathered, pressure treated or uncoated wood
- Place cloth duct tape in random areas on the bare wood. Press the tape firmly then quickly remove it.
- If wood fibers or debris are pulled onto the tape, the wood surface is not sound and additional preparation is required as follows: Clean surface with a product such as BEHR PREMIUM NO. 64 Wood Stain & Finish Stripper. Rinse.
- Follow with a product such as BEHR PREMIUM NO. 63 All-In-One Wood Cleaner at full strength to remove mill glaze and/or loose wood fibers, dirt and other debris. Rinse and allow to dry.
Read More
Application
- Use when air and surface temperature are 50-90˚F (10-32˚C).
- Do not apply in direct sunlight or if rain is expected within 24 hours.
- Wood surfaces must be completely dry.
- When working with more than one container of the same color, intermix to ensure color uniformity.
- Redwood, Cedar, Cypress and other “bleeding” woods contain water soluble extractives which may cause discoloration of white and pastel colors; therefore prime the above type woods with one coat of a product such as BEHR® MULTI-SURFACE STAIN-BLOCKING PRIMER & SEALER to reduce these stains.
- Apply with a nylon/polyester brush on smooth surfaces. On rough-sawn or textured wood apply with a 3/4" long nap roller or high quality airless sprayer. For airless spraying use a .015" tip. Keep a wet edge to reduce lapping and help control color uniformity.
- Always back-brush or back-roll during all application methods.
- Two coats may be necessary for complete hiding. Apply the second coat only after the first coat has thoroughly dried.
Read More
Dry Time
- Longer dry time required in cooler temperatures and higher humidity.
Read More
Disposal
- For disposal of empty containers and unused product contact your household refuse collection service.
Read More
Read More
Reviews
Often Bought Together
How-To
Find step-by-step instructions in our how-to articles and videos.
SDS AND DATA SHEET
WARRANTY
LIMITED WARRANTY: For one year from the date of purchase, Behr Paint Company warrants to the original consumer purchaser, (1) that the product meets Behr Paint Company manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
