BEHR® Multi-Surface Roof Paint

2 Hour Dry Time
4 Hour Recoat Time

Per Gallon: Up to 450ft

Soap & Water Clean-Up

Protect from Freezing

This product is intended to brighten roofs and reflect heat (Reflective White only). Not intended to waterproof or repair roof leaks.

Preparation

• Replace brittle or cracked shingles. Clean all roof surfaces.
• Previously coated surfaces should be wire brushed or scraped to remove all loose coating.
• Remove mildew with a mildew stain removing product.
• Prepare the surface using a concrete & masonry cleaner & etcher.
• If applying on wood shakes, clean with a product such as BEHR PREMIUM NO. 63 All-In-One Wood Cleaner. Follow directions on product labels.
• Rinse thoroughly and allow a minimum of 24 hours to dry.

Prime

• Prime all metal, asphalt and wood surfaces with a product such as BEHR® MULTI-SURFACE STAIN-BLOCKING PRIMER & SEALER NO. 436. Follow directions on product label.

Application

• DO NOT THIN.
• When working with more than one can of the same product, inter-mix to ensure color uniformity. Stir paint before and occasionally during application.
• Use product when air and surface temperature are 50-90˚F (10-32˚C). Do not use if rain or heavy dew is expected within 24 hours.
• Do not apply in direct sunlight.
• All roof surfaces must be dry.
• Apply starting at the top of the roof and working down, using a high quality 1" nap roller, nylon/polyester brush or high quality airless sprayer (.015"-.017" sprayer tip). Always maintain a wet edge to avoid lap marks.
• A second coat is optional for improved hide and durability.

Dry Time

• Longer dry time required in cooler temperatures and higher humidity.

Disposal

• Properly dispose of all soiled rags.
• For disposal of empty containers and unused product contact your household refuse collection service.

For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.