ETX^® SingleShot^™ Plus Wall & Ceiling Texture

Features you'll love

• Angled nozzle
• Assortment of texture patterns
• Aerosol spray can provide ultimate control over texture of patterns

Where to Use

Ideal for use on properly prepared surfaces such as: Drywall

Surface Preparation

The surface must be clean and dry before spraying ETX® SingleShot™ Plus Wall & Ceiling Texture.

Product Usage

To Use:

• Always keep nozzle pointed away from face. The use of personal protective equipment is required.
• Shake can vigorously for 10–15 seconds. This product works best when contents are between 75°F and 90°F.
• The adjustable nozzle allows for infinite adjustability. Simply twist the nozzle clockwise for knockdown and counterclockwise for orange peel.
• Holding the can upright approximately 30-34 inches from wall, depress the nozzle to begin spraying. Test ETX® SingleShot™ Plus Wall & Ceiling Texture in an inconspicuous spot to make sure you have achieved the desired pattern. If the flow decreases, shake the can vigorously. Spray using a circular motion to disperse evenly. Overlap the spray onto the existing texture to help blend in. A second coat may be applied for a heavier texture.

Dry Time:

• Drying times will differ, depending on the surface, heaviness of texture, humidity, etc. Paint when completely dry with your choice of paint. For better results, prime area before painting.

To Clean:

• When finished applying texture, purge the inner tube by flipping the can upside down and pressing down on the nozzle.

• Do not stick pins or wire into spray nozzle opening.

• Do not burn or place in home trash compactor.

• Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service.

Safety and Data Sheets

Warranty

Behr Process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. THIS WARRANTY EXCLUDES WATER INTRUSION DUE TO STRUCTURAL DEFECTS AND/OR CAULK AND SEALANT FAILURE. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.