How to Use BEHR® Premium Flocked Foam Rollers

Get a flawless, spray-like finish on cabinets, doors, and trim with BEHR® Premium Flocked Foam Rollers designed with flocking technology to minimize bubbles* and provide superior coverage for a faster project completion.

*When compared to standard foam rollers using premium paint

Suggested Tools & Supplies

Roller Frame
Tray & Liner
Painter’s Tape
Drop Cloth
Paint Key
Stir Stick

APPLICATION

Step 1: ATTACH ROLLER TO FRAME
Attach roller to 4” wire frame and leave a 1/4” gap from frame to ensure smooth rolling.
Step 2: LOAD WITH PAINT
Dip the roller into the paint, roll it over the ribbed section of the tray, and repeat for 10 to 15 seconds until the roller is fully saturated.
Step 3: PAINT
Use the end of the roller to fill in corners. Roll with moderate pressure overlapping each new section with the previous section.
TIP:
If you need to take a short break during your project, wrap the roller tightly in plastic and place it in a cool area to keep the paint from drying out until you're ready to continue.