VIRUCIDAL† & ANTIBACTERIAL‡
Continually kills harmful bacteria‡ and viruses† for up to six years on painted surfaces†SARS-CoV-2 and Feline calicivirus (EPA proxy for human noroviruses)
‡Staphylococcus aureus (Staph) and Pseudomonas aeruginosa
BEHR® COPPER FORCE™ Interior Paint
REDEFINES HOW PAINT PROTECTS
Keep your home protected with BEHR® COPPER FORCE™ Interior Paint. Copper is found everywhere around us – from high-touch surfaces, such as door hardware, to things we drink from and cook in. Our breakthrough formula harnesses copper’s antimicrobial properties, killing 99.9% of viruses† and bacteria‡ within two hours of contact on the painted surface and lasts for up to six years*.
†SARS-CoV-2 and Feline calicivirus (EPA proxy for human noroviruses)
‡Staphylococcus aureus (Staph) and Pseudomonas aeruginosa
*As long as the integrity of the painted surface is maintained.
Features
- EPA-Registered Virucidal† & Antibacterial‡ Paint
- Paint & Primer◊
- Excellent Hide & Coverage
- Washable Finish
- GREENGUARD® GOLD Certified♦
- Low Odor
†SARS-CoV-2 and Feline calicivirus (EPA proxy for human noroviruses)
‡Staphylococcus aureus (Staph) and Pseudomonas aeruginosa
‡Staphylococcus aureus (Staph) and Pseudomonas aeruginosa
◊A primer coat may be needed on some surfaces. See label for details.
◆BEHR COPPER FORCE meets stringent GREENGUARD® certification standards that help earn points toward LEED® certification. GREENGUARD certified products conform to GREENGUARD emission standards to help reduce indoor air pollution and the risk of chemical exposure. GREENGUARD is a registered trademark of UL LLC. For more information, visit ul.com/gg.
Why Choose BEHR® COPPER FORCE™ INTERIOR PAINT?
BEHR® COPPER FORCE™ Interior Paint provides an additional layer of protection against viruses† and bacteria‡ on walls and painted surfaces your family touches at all times, all while providing the aesthetic appeal and performance you expect from Behr. †SARS-CoV-2 and Feline calicivirus (EPA proxy for human noroviruses)
‡Staphylococcus aureus (Staph) and Pseudomonas aeruginosa
EXCELLENT HIDE & COVERAGE
Easy to apply and ensures great coverage
WASHABLE FINISH
Scrubbable, washable paint film ideal for high-touch areasBEHR® COPPER FORCE™ PALETTE
Offered in two finishes. The BEHR® COPPER FORCE™ palette includes more than 2,000 colors, as well as custom color matching. Now available exclusively at The Home Depot®. Looking for a specific color? Use our color search to see if your color is available in Behr Copper Force paint.
Diamonds Therapy
BWC-30
Weathered White
HDC-NT-21
Cameo White
MQ3-32
Painter's White
PPU18-08
Silver Ash
GR-W11
Etched Glass
MQ3-27
Cascade Beige
N240-1
Cottage White
13
Antique White
23
Natural Gray
PPU18-10
Classic Silver
PPU18-11
Silver Bullet
N520-2
Stolen Kiss
MQ3-34
Dove
HDC-MD-21
Sage Brush
S370-3
Weathered Moss
N380-3
Breezeway
MQ3-21
Half Sea Fog
N470-3
Sweet Tea
S210-3
Corn Stalk
M290-3
Jojoba
N390-3
Wave Top
M450-3
Teton Blue
N490-4
Washed Denim
M530-4
Dry Brown
N230-5
Basswood
MQ2-46
Cellini Gold
HDC-CL-18
Voyage
PPU13-07
Blueprint
S470-5
English Channel
PPU14-19
No More Drama
P140-7
True Copper
S180-7
Fresh Croissant
S250-4
Secret Meadow
S360-6
Black Evergreen
MQ6-44
Black
BLACK
Diamonds Therapy
BWC-30
Weathered White
HDC-NT-21
Dove
HDC-MD-21
Cameo White
MQ3-32
Painter's White
PPU18-08
Natural Gray
PPU18-10
Cascade Beige
N240-1
Stolen Kiss
MQ3-34
No More Drama
P140-7
Antique White
23
Sweet Tea
S210-3
True Copper
S180-7
Cottage White
13
Fresh Croissant
S250-4
Dry Brown
N230-5
Corn Stalk
M290-3
Cellini Gold
HDC-CL-18
Basswood
MQ2-46
Silver Ash
GR-W11
Sage Brush
S370-3
Secret Meadow
S360-6
Weathered Moss
N380-3
Jojoba
N390-3
Black Evergreen
MQ6-44
Breezeway
MQ3-21
Wave Top
M450-3
Voyage
PPU13-07
Half Sea Fog
N470-3
Teton Blue
N490-4
Blueprint
S470-5
Etched Glass
MQ3-27
Washed Denim
M530-4
English Channel
PPU14-19
Silver Bullet
N520-2
Classic Silver
PPU18-11
Black
BLACK
DID YOU KNOW
The BEHR® COPPER FORCE™ palette includes more than 2,000 colors. Looking for a specific color? Use our color search to see if your color is available in BEHR® COPPER FORCE™ paint.
LOOKING FOR A SPECIFIC COLOR?
SEARCH FOR A COLOR NAME OR COLOR NUMBER TO SEE IF ITS TINTABLE IN THE BEHR® COPPER FORCE™ PAINT
Offered in two finishes. The BEHR ® COPPER FORCE ™ palette includes more than 2,000 colors, as well as custom color matching. Now available exclusively at The Home Depot®.
SEARCH ERROR
X
The color name or number is not recognized as a valid entry. Please check the name or number and try again.
AVAILABLE SHEENS
Offered in two finishes. The BEHR® COPPER FORCE™ Interior Paint palette includes more than 2,000 colors, as well as custom color matching. Now available exclusively at The Home Depot®.
-
PRODUCT USAGE AND APPLICATION INSTRUCTIONS
-
SDS & DATA SHEET
-
WARRANTY
- PRODUCT USAGE AND APPLICATION INSTRUCTIONS
- SDS & DATA SHEET
- WARRANTY
PRODUCT USAGE
- IF IN EYES: Hold eye open and rinse slowly and gently with water for 20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for further treatment advice.
- IF ON SKIN: Take off contaminated clothing. Rinse skin immediately with plenty of water for 20 minutes. Call a poison control center or doctor for treatment advice.
- IF SWALLOWED: Call a poison control center or doctor immediately for treatment advice. Have a person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or doctor. Do not give anything to an unconscious person. Have the product container label with you when calling a Poison Control Center or doctor or going for treatment. For emergency information concerning this product, call the National Pesticides Information Center at 1-800-858-7378, 6:30 AM to 4:30 PM Pacific time (PT), seven days a week. During other times, call the poison control center at 1-800-222-1222.
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS.
Read More
ENVIRONMENTAL HAZARDS
Do not apply directly to lakes, streams, ponds, estuaries, oceans or other waters by cleaning of equipment or disposal of wastes. Dispose of paint debris in an approved landfill. Do not discharge effluent containing this product into lakes, streams, ponds, estuaries, oceans or other waters unless in accordance with the requirements of a National Pollutant Discharge Elimination System (NPDES) permit and the permitting authority has been notified in writing prior to discharge. Do not discharge effluent containing this product to sewer systems without previously notifying the local sewage treatment plant authority. For guidance, contact your State Water Board or Regional Office of the EPA.Read More
PRODUCT USES:
DO NOT USE ON FLOORS OR ON EXTERIOR SURFACES.Read More
Read More
SURFACE PREPARATION*
- All surfaces should be clean, free of dust, chalk, oil, grease, wax, polish, mold and mildew stains, loose and peeling paint, rust, and all other foreign substances. Scuff sand glossy surfaces and repair imperfections. Allow new concrete, plaster and masonry to cure for 30 days before painting.
- Although this product is a paint & primer (self-priming — first coat is the primer and the second coat is the finish) over most properly prepared surfaces, certain substrate and exposure conditions, as well as project requirements, may necessitate the use of substrate-specific or solution-driven primers.
Read More
APPLICATION
- For best results, apply when air, material and surface temperatures are between 50°F and 90°F.
- Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
- Do not thin. Product is formulated at package consistency.
- Apply two coats by brush (nylon/polyester), roller (3/8" – 1/2" nap) or airless sprayer (.015" – .019" spray tip) at a coverage of 250 – 400 sq ft per gallon. Coverage depends on application method and substrate porosity. Certain colors may require additional coats for complete hide.
- Dries to touch in 1 hour; recoat after 2 hours @ 77°F and 50% RH. Drying and recoat times are dependent on temperature, humidity and film thickness.
- Clean all tools and equipment with soap and water.
Read More
SURFACE CARE AND MAINTENANCE
- Periodic cleaning to remove dirt and stains is necessary for good sanitization and to assure the effective virucidal and antibacterial performance of the surface. Cleaning does not reduce the virucidal and antibacterial performance of the painted surface. To ensure continuous protection, repaint surface if film becomes damaged (peeled, cracked, etc.) or if paint becomes covered with oils, grease, wax, other paints and other foreign substances; or within 6 years.
- Proper Surface Care and Use: The use of an antimicrobial treated surface is a supplement to and not a substitute for standard infection control practices; users must continue to follow all current infection control practices, including those practices related to cleaning and disinfection of environmental surfaces. The painted surface material has been shown to reduce microbial contamination, but does not necessarily prevent cross contamination.
- Cleaning Directions: Cleaning agents typically used on painted surfaces are acceptable. The appropriate cleaning agent depends on the type of soiling and the measure of sanitization required. The best way to wash painted surfaces is to use a soft damp cloth or sponge and a mild detergent solution (a small amount of dishwashing liquid in water). Gently wipe the soiled area (using the least amount of pressure) until the stain is removed. Allow the cleaning solution to do the work. Do not scrub the surface as this can actually cause the stain to spread. Rinse surface with clean water. Do not use harsh or abrasive cleansers or pads, which can scratch, burnish or damage the paint film. Consider using BEHR SWIPES Interior Wall Wipes for removing stubborn stains, such as lipstick and crayon.
- DO NOT USE OXIDIZING CLEANERS/DISINFECTANTS, SUCH AS BLEACH AND HYDROGEN PEROXIDE, OR ENZYME-BASED CLEANING SOLUTIONS AS THEY WILL CAUSE DISCOLORATION AND REDUCE THE EFFICACY OF THE SURFACE.
Read More
STORAGE AND DISPOSAL
- Do not contaminate water, food, or feed by storage and disposal.
- STORAGE: Store away from food and pet food. Open dumping is prohibited. Keep container closed when not in use. Do not transfer contents to other containers. Protect containers from extreme heat and cold.
- DISPOSAL and CONTAINER HANDLING: Nonrefillable container. Do not reuse or refill this container. If empty: Place in trash or offer for recycling if available. If partly filled: Call your local solid waste agency for disposal instructions. Never place unused product down any indoor or outdoor drain. Waste resulting from the use of this product may be disposed of on site or at an approved waste disposal facility.
Read More
Read More
WARRANTY
For six years from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
