CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
Compare
BLACK
BLACK
What sheen do I need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep and pre-treat wood prior to any stain project.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep and pre-treat wood prior to any stain project. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when stripping is needed.
$0.00
The Home Depot logoSold Exclusively at The Home Depot

BEHR® COPPER FORCE Interior Semi-Gloss Enamel

Avg. Rating:
false

COPPER FORCE™ Interior Semi-Gloss Enamel Paint is an EPA-registered virucidal† and antibacterial‡ interior paint & primer. Our breakthrough formula harnesses copper’s antimicrobial properties, not just inhibiting the growth of common microbes, but actually killing 99.9% of viruses† and bacteria‡ on the painted surface within two hours of exposure and lasts for up to six years. This product provides durability and is ideal for use in high-traffic, high-touch indoor environments in residential settings.

Click Here to find out if BEHR® COPPER FORCE™ Interior Paint is available in a Home Depot® nearest you.


Finish

A semi-gloss paint has a sleek, radiant sheen that resists mildew, moisture, and wear.

Best for use in

Kitchen, bathrooms, and other high-traffic, high-moisture areas.

Coverage

250-400 Sq Ft per Gallon


320424620
paint-brand-pdp
PRODUCT USAGE

For application to hard, non-porous interior walls, ceilings, doors and trim in residential, commercial and institutional settings. Ideal for use in homes, offices, clinics, nursing homes, athletic facilities, schools, community centers, daycare centers, assisted living communities, hotels and resorts. Also suitable for non-critical areas of hospitals, such as examination rooms, waiting rooms, hallways and walkways. See SURFACE CARE AND MAINTENANCE for proper care and cleaning information. DO NOT USE ON FLOORS OR ON EXTERIOR SURFACES.

Read More

It is a violation of federal law to use this product in a manner inconsistent with its labeling.

Read More

  • All surfaces should be clean, free of dust, chalk, oil, grease, wax, polish, mold and mildew stains, loose and peeling paint, rust, and all other foreign substances. Scuff sand glossy surfaces and repair imperfections. Allow new concrete, plaster and masonry to cure for 30 days before painting.
  • Although this product is a paint & primer (self-priming — first coat is the primer and the second coat is the finish) over most properly prepared surfaces, certain substrate and exposure conditions, as well as project requirements, may necessitate the use of substrate-specific or solution-driven primers.
Read More

  • For best results, apply when air, material and surface temperatures are between 50°F and 90°F.
  • Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity. 
  • Do not thin. Product is formulated at package consistency.
  • Apply two coats by brush (nylon/polyester), roller (3/8" – 1/2" nap) or airless sprayer (.015" – .019" spray tip) at a coverage of 250 – 400 sq ft per gallon. Coverage depends on application method and substrate porosity. Certain colors may require additional coats for complete hide.
  • Dries to touch in 1 hour; recoat after 2 hours @ 77°F and 50% RH. Drying and recoat times are dependent on temperature, humidity and film thickness.
  • Clean all tools and equipment with soap and water.
Read More

  • Periodic cleaning to remove dirt and stains is necessary for good sanitization and to assure the effective virucidal and antibacterial performance of the surface. Cleaning does not reduce the virucidal and antibacterial performance of the painted surface. To ensure continuous protection, repaint surface if film becomes damaged (peeled, cracked, etc.) or if paint becomes covered with oils, grease, wax, other paints and other foreign substances; or within 6 years.
  • Proper Surface Care and Use: The use of an antimicrobial treated surface is a supplement to and not a substitute for standard infection control practices; users must continue to follow all current infection control practices, including those practices related to cleaning and disinfection of environmental surfaces. The painted surface material has been shown to reduce microbial contamination, but does not necessarily prevent cross contamination.
  • Cleaning Directions: Cleaning agents typically used on painted surfaces are acceptable. The appropriate cleaning agent depends on the type of soiling and the measure of sanitization required. The best way to wash painted surfaces is to use a soft damp cloth or sponge and a mild detergent solution (a small amount of dishwashing liquid in water). Gently wipe the soiled area (using the least amount of pressure) until the stain is removed. Allow the cleaning solution to do the work. Do not scrub the surface as this can actually cause the stain to spread. Rinse surface with clean water. Do not use harsh or abrasive cleansers or pads, which can scratch, burnish or damage the paint film. Consider using BEHR SWIPES Interior Wall Wipes for removing stubborn stains, such as lipstick and crayon.
  • DO NOT USE OXIDIZING CLEANERS/DISINFECTANTS, SUCH AS BLEACH AND HYDROGEN PEROXIDE, OR ENZYME-BASED CLEANING SOLUTIONS AS THEY WILL CAUSE DISCOLORATION AND REDUCE THE EFFICACY OF THE SURFACE.
Read More

  • Do not contaminate water, food, or feed by storage and disposal.
  • STORAGE: Store away from food and pet food. Open dumping is prohibited. Keep container closed when not in use. Do not transfer contents to other containers. Protect containers from extreme heat and cold.
  • DISPOSAL and CONTAINER HANDLING: Nonrefillable container. Do not reuse or refill this container. If empty: Place in trash or offer for recycling if available. If partly filled: Call your local solid waste agency for disposal instructions. Never place unused product down any indoor or outdoor drain. Waste resulting from the use of this product may be disposed of on site or at an approved waste disposal facility.
Read More

Reviews

MSDS AND DATA SHEET

WARRANTY

For six years from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Never miss out on the hottest deals and latest news from BEHR.

Please enter email address.
Please enter email address.