How to stain a chair with BEHR® Fast Drying Water-Based Wood Stain
So you're ready to give that chair some new life. Let's do it. We can make this chair brighten up the room using these quick-drying, water-based products.
For best results:
Start your interior stain project by cleaning the surface and lightly sanding the wood.
Apply BEHR® Water-Based Pre-Stain Wood Conditioner to prevent streaks and blotches.
Tools & supplies
- Sandpaper (120, 220, 320 and 400 Grit)
- Sanding Block
- Cheesecloth
- Latex Gloves
- Mini Foam Applicator
- Multi-Purpose Shop Rags
- Metal Can Opener
- Paint Thinner
- Painter's Tape
- Plastic Containers
- Drop Cloths
- Tack Cloth
- Natural Bristle Brush
- Safety Glasses
- Screwdriver
Step-by-step process
Step 1
To prep the surface, sand the wood evenly with a sanding block and 220 grit sandpaper. Then, wipe away the dust with a lint-free cloth.
Step 2
Apply BEHR® Water-Based Pre-Stain Wood Conditioner and let it penetrate the wood for 20 minutes.
Step 3
Apply BEHR® Fast Drying Water-Based Wood Stain, working the stain into the grain. Give the stain 3-5 minutes to penetrate.
Step 4
Use a lint-free cloth to remove any excess stain, and to blend any light and dark areas. Let the stain dry for one hour. For darker color, repeat the previous steps.
Step 5
Brush on two coats of BEHR® Fast Drying Water-Based Polyurethane. Lightly sand between coats with 220 grit sandpaper.
TIP:
For a smooth finish, hold the brush at a 45-degree angle and brush lightly across the surface.
