Features you'll love

• Beautify and protect the natural beauty of all your home's concrete & masonry surfaces.
• Makes a great topcoat over paints and stains.

Product Specs

Spread Rate 200-450 Sq. Ft

1 HR Dry Time
4 HR Recoat Time

Soap & Water Clean-Up

Protect from Freezing

Where to Use

Use on previously Coated/Uncoated, Vertical/Horizontal, Interior/Exterior surfaces such as: Pavers, Concrete, Mexican Tile and Unglazed Tiles, Brick, Aggregate, Unpolished Natural and Artificial Stone, Masonry and Stucco. Not recommended for Wood, Metal, Granite, Marble, Terrazzo, areas immediately adjacent to pools, or areas subject to hydrostatic pressure. Do not use over oil-based products.

CAUTION: Sealed surfaces may become slippery when wet. Use caution when walking on surface when moisture is present.

How to Use

Preparation† (Proper surface preparation is required.)

• All surfaces must be clean, sound, dry and free of any dirt, oil and grease.

New and Uncoated Concrete or Masonry Surfaces:

• Allow new surfaces to cure 30 days.
• Clean and etch surface using a product such as a muriatic acid etcher (follow all manufacturer’s label instructions) to achieve a textured profile similar to 150 grit sandpaper.
• Wipe your fingers over the clean, dry floor to check for dust or powder. Ensure there is no residue on your fingers that may have been left from the etcher.
• If residue is found, rinse the surface to remove residue. Allow the surface to dry completely.
• If the surface feels like 150 grit sandpaper or rougher, the surface is ready.

If not, re-etch and follow all manufacturer’s label instructions.

Painted Surfaces-Concrete:

• For a painted surface in sound condition, use a product to clean and prepare the surface (follow all manufacturer’s label instructions).
• Stamped concrete requires the use of a cleaner to remove release agent prior to sealing.
• If the coating is failing or peeling, use a paint stripper (follow all manufacturer’s label instructions) to remove old coating or scrape/sand down to a sound concrete surface.
• Scuff sand glossy surfaces for improved adhesion.
• Clean and spot etch any exposed concrete.
• Remove all dust with a damp cloth, allow to dry.

Prime

• For porous/rough horizontal concrete, masonry, brick, and stone surfaces exposed to vehicle tires, foot traffic, moisture, or areas previously treated for efflorescence or laitance use NO. 880 BEHR PREMIUM® Concrete & Masonry Bonding Primer to optimize topcoat adhesion.

Application

• DO NOT THIN.
• Stir or shake before applying.
• Use product when surface and air temperatures are between 50-80° F (10-27° C).
• Do not apply in direct sunlight, on wet surfaces, or if rain/heavy dew is expected within 24 hours.
• Apply a thin coat using a high quality pump sprayer with an adjustable tip, a high quality pad applicator, a nylon/polyester brush, or a 1/4" nap roller.
• If sprayed, backroll for uniform thickness.
• DO NOT ALLOW PRODUCT TO POOL. Remove any puddles by spreading product to drier areas, back rolling using a nap roller or by wiping up excess with a clean cloth before it dries to touch.
• Additional coats (no more than 4) may be added for added protection.
• Improper surface preparation, insufficient drying, or over-application can result in a milky white appearance.
• Note: Horizontal surfaces may be subject to excessive wear.
• Periodic touch ups or maintenance coats may be necessary.

Dry Time

• Longer dry time required in cooler temperatures and higher humidity.
• Allow to dry 24 hours for light foot traffic.
• 72 hours to reposition furniture/heavy foot traffic and park tires on corrugated cardboard for 14 days.

• Clean with a mild, non-abrasive liquid detergent after 30 days.

Disposal

• Properly dispose of all soiled applicators and rags after use and protect unused product from freezing.
• For disposal of empty containers and unused product contact your household refuse collection service.

Safety and Data Sheets

Warranty

LIMITED WARRANTY: For one year from the date of purchase, Behr Paint Company warrants to the original consumer purchaser, (1) that the product meets Behr Paint Company manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.