BEHR PREMIUM® Porch & Patio Floor Paint - Low-Lustre Enamel with Heat-Reducing Technology

Spread Rate:
Rough
Up to 200-300 Sq. Ft.
Smooth
Up to 300-400 Sq. Ft.

Dry Time:
1 hour
Dry to touch
4-6 hours
Recoat

Clean-Up soap & water

Protect from freezing

On properly prepared, uncoated or previously painted Interior/Exterior wood and concrete surfaces. Ideal for Porches, Decks, Basement Floors, Patios, Spindles and Railings. Do not use on areas subject to automotive tires.

CAUTION: Painted surfaces may become slippery when wet. Use caution when walking on surface when moisture is present. Adding a product such as BEHR PREMIUM® No. 970 Anti-Slip Floor Finish Additive may help prevent slipping.

Preparation† (Proper Surface Preparation is Required.)

• All surfaces must be clean, sound, dry and free of any dirt, oil and grease.
• Remove mildew stains with a mildew stain removing product.
• New or Weathered Wood: Use a product such as BEHR PREMIUM® No. 63 All-In-One Wood Cleaner. Lightly sand to remove remaining wood fibers/fuzz.
• Painted Surfaces-Wood: For a painted surface in sound condition, use a product to clean and prepare the surface. If the coating is failing or peeling, use a paint stripper to remove old coating. Scuff sand glossy surfaces. Use stainless steel or galvanized nails to prevent nail staining. Countersink nail heads, repair imperfections and sand smooth. Remove all dust with a damp cloth, allow to dry.
• Uncoated Concrete or Masonry Surfaces: For a painted surface in sound condition, use a product to clean and prepare the surface. If the coating is failing or peeling, use a paint stripper to remove old coating or scrape/sand down to a sound concrete surface. Scuff sand glossy surfaces. Clean and spot etch any exposed concrete. Remove all dust with a damp cloth, allow to dry.
• Painted Surfaces-Concrete: For a painted surface in sound condition, use a product to clean and prepare the surface. If the coating is failing or peeling, use a paint stripper to remove old coating or scrape/sand down to a sound concrete surface. Scuff sand glossy surfaces. Clean and spot etch any exposed concrete. Remove all dust with a damp cloth, allow to dry.

Prime

• Interior/Exterior Wood: Over uncoated and previously coated surfaces, use a product such as BEHR® No. 436 Multi-Surface Stain Blocking Primer & Sealer.
• Interior/Exterior Concrete or Masonry: Over uncoated and previously coated surfaces, use a product such as BEHR PREMIUM^® No. 880 Concrete & Masonry Bonding Primer.

Application

• Use product when the surface and air temperatures are between 50-90° F (10-32° C).
• Stir paint occasionally.
• When working with more than one can of the same product, intermix to ensure color uniformity.
• Use a high quality 3/8 - 1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015 - .017" spray tip, 60 mesh filter).
• Spread rate varies, depending on the surface texture, porosity and application method.
• Two coats are required for optimal coverage, hide, performance and durability.
• Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.

Dry Time

• Longer dry time required in cooler temperatures and in higher humidity.
• Allow 72 hours before subjecting to normal use. After 30 days, cured paint film may be cleaned with a mild, non-abrasive liquid detergent. Dry paint film is mildew resistant.

Disposal

• Properly dispose of all soiled rags.
• For disposal of empty containers and unused product, contact your household refuse collection service.

LIMITED WARRANTY: For one year from the date of purchase, Behr Paint Company warrants to the original consumer purchaser, (1) that the product meets Behr Paint Company manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.