BEHR PREMIUM® Oil-Base Paint
Features you'll love
- Provides excellent flow & leveling and dries to a hard, durable finish.
Product Specs
2-3 Hour Dry Time
24 Hour Recoat Time
2 Coats Recommended for Optimal Durability
Up to 500 Sq. Ft. Coverage per Gallon
Mineral Spirits Clean-Up
Where to Use
Properly prepared Interior or Exterior surfaces such as: Wood, Drywall, Plaster, Masonry, Metal, Well-bonded Wallpaper, Brick, Stucco, Aluminum and Cinder Block. Do not use on horizontal surfaces.
How to Use
Preparation
- Allow new stucco, plaster and masonry to cure for 30 days.
Clean
- For interior and exterior surfaces, remove dirt, oil and grease stains with a concrete & masonry degreaser and cleaner product.
- Remove mildew stains with a mildew stain removing product.
- Remove all loose and peeling paint; scuff sand glossy surfaces; caulk; repair imperfections and sand smooth.
- For exterior surfaces, power wash to remove chalk.
- Etch galvanized metal with a concrete & masonry cleaner & etcher product.
Prime
- For all exterior surfaces, use a product such as BEHR® Multi-Surface Interior/Exterior Stain-Blocking Primer & Sealer No. 436.
- For all interior surfaces, use a product such as BEHR® Kitchen, Bath & Trim Interior Stain-Blocking Primer & Sealer No. 75. Follow all label instructions.
Application
- DO NOT THIN.
- Stir before and during application. When working with more than one can of the same product, intermix to ensure color uniformity.
- Use adequate ventilation during application & drying process.
- Certain colors may require more than one coat to achieve complete hide and coverage.
- Use product when air and surface temperature are 40-90˚F (4-32˚C).
- Apply a thin coat using a high quality china bristle brush, high quality 1/4"-3/8" nap roller or an airless sprayer (.013”-.015” spray tip, 60 mesh filter).
Dry Time
- Longer dry time required in cooler temperatures and higher humidity or with darker colors.
- Wait at least 30 days before rinsing or cleaning the surface with a mild, non-abrasive detergent.
Disposal
- Properly dispose of all soiled rags.
- For disposal of empty containers and unused product, contact your household refuse collection service.
Safety and Data Sheets
Warranty
For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
Finish
Semi-Gloss and Satin
Best For Use In
Ideal for properly prepared and primed wood, drywall, plaster, masonry, metal, brick, stucco, aluminum, cinder block, and other sound above-grade interior/exterior surfaces.
Coverage
350-550 Sq. Ft per Gallon
Find your perfect finish
Get the look you want and the protection you need for any room in your home.
Satin
A satin sheen creates a pearl-like appearance that resists dirt and grime as well as mildew.
https://main--behr--mascocg.aem.page/products/compare-interior-paint-sheens
Semi-Gloss
A semi-gloss paint has a sleek, radiant sheen that resists mildew, moisture and wear.
https://main--behr--mascocg.aem.page/products/compare-interior-paint-sheens