BEHR® Oil-Latex Redwood Stain

Ideal for wood patio furniture, fences, siding, exterior trim, and wood planters. Not intended for horizontal surfaces subject to foot traffic.

• Must Prep before staining
• Spread Rate 200-400 Sq. Ft
• 1 HR Dry Time . 4 HR Recoat Time
• Soap & Water Clean-Up

Preparation

• Use a product such as BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper to remove loose wood fibers, latex, oil-based and 100% acrylic coatings on new or weathered wood.
• BEHR PREMIUM® NO. 63 All-In-One Wood Cleaner MUST be used following NO. 64 to clean, brighten & neutralize wood.
• When NO. 64 is not needed, use a product such as NO. 63 to clean and brighten the wood surface and to remove light to medium exterior stains caused by mold, mildew, algae & fungus. Rinse thoroughly and allow to dry before coating.

• On new wood, use a product such as NO. 63 to remove mill glaze and open the pores of the wood. Lightly sand any remaining wood fibers/fuzz.

Application

For horizontal surfaces, use BEHR PREMIUM Solid Color Weatherproofing All-In-One Wood Stain & Sealer.

• Must apply between 40-90˚F (4.5-32˚C). Do not use if rain is expected within 24 hours.
• Intermix multiple containers to ensure color uniformity. DO NOT THIN PRODUCT.
• Stir product occasionally throughout application. Avoid applying stain in direct sunlight or to hot surfaces.
• Apply with a natural bristle brush or pad applicator. On rough surfaces apply with a 3/4" long nap roller or high quality airless sprayer using a .015 - .019" tip.
• Follow spraying immediately with back-brushing or back-rolling for a uniform appearance.
• Two coats may be applied, however a more solid color appearance will result.
• Over application of stain will lead to surface failure including peeling and cracking.
• Avoid applying stain too heavily.

Disposal

• For disposal of empty containers and unused product, contact your household refuse collection service.

For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that this product meets Behr Process LLC’s manufacturing specifications, and (2), the performance of this product when applied according to the label instructions and specifications. In the event that this product proves to be defective within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.