AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

BEHR DYNASTY® Exterior Flat No. 4650

Avg. Rating:

BEHR DYNASTY Exterior Flat Paint delivers 10-year color fade protection* designed to withstand even the most challenging weather conditions while retaining its color and beauty.

FOR TINT BASES – DO NOT USE WITHOUT THE ADDITION OF TINTING COLORANTS

*Valid only when tinted to colors from the BEHR DYNASTY® specially curated Exterior Color Fade Protection Palette. Based on predictive lab testing with a color shift less than Delta E of 5 as measured by CieLAB. A primer coat may be needed. Two coats of BEHR DYNASTY Exterior Paint are recommended for optimal durability. Individual results may vary. See back label instructions for details. Behr Paint Company can provide project-specific warranties. Ask your BEHR PRO Rep for details. The Limited Lifetime Warranty does not apply to or cover BEHR DYNASTY 10-Year Color Fade Protection or professional projects.

AVAILABLE IN OVER 1,500 COLORS
Find the perfect color for all your clients project. Explore Colors

5 Gallon BEHR DYNASTY Flat 4650

Technical Data Sheets

Product Certifications & Declarations

Finish

Flat Finish

Best For Use In

Wood and vinyl walls and siding; brick and other masonry; fences. Do not use on floors.

Coverage

250-400 Sq. Ft per Gallon depending on the application method and substrate porosity. It does not include the loss of material from spraying.

PRODUCT USAGE
  • Clock icon

    1 HR Dry Time
    2 HR Recoat Time

  • Paint coverage icon.

    250-400 Sq. Ft.
    Coverage per Gallon

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

  • Thermometer Icon

    Protect
    from Freezing

Use on properly prepared and cleaned coated and uncoated Exterior surfaces. Protection for Wood, Vinyl, Aluminum, Fiber Cement Siding, Metals, Brick, masonry, Stucco, Steel and Fences. Do not use on floors.

Preparation

  • Use on properly prepared and cleaned coated and uncoated Exterior surfaces.
  • Countersink nailheads, fill and sand smooth.
  • Remove rust, loose or peeling paint. Repair imperfections and sand smooth.
  • Wash off dirt, grease and chalk with detergent and/or powerwash. Remove mildew stains with a mildew stain removing product.
  • Clean and sand new or weathered wood. Scuff sand or degloss smooth or glossy surfaces.
  • Scuff sand or etch metals. Rinse and allow to dry.
  • Caulk windows, doors and other openings.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting. Use BEHR DYNASTY paint as a primer for repaired or uncoated surfaces, including woods that contain tannins and heavily stained areas (two primer coats required for redwood and cedar).
  • Lock in stains with the first primer coat; if necessary, apply a second primer coat of BEHR DYNASTY.
  • For drastic color changes or when applying deep colors denoted with a dagger (†) on the color chip, apply a tinted primer coat of BEHR DYNASTY, if needed.

Read More

Application

  • Apply product on dry substrates when air and surface temperatures are between 35°-90°F (2°-32°C) and will remain between 35°-90°F (2°-32°C) for at least 4 hours after applying.
  • Allow paint film to dry for at least 60 minutes prior to rain showers when temperatures are between 60°-70° F (15°-21° C) and 60-70% relative humidity.
  • Lower temperatures, higher humidity or deep colors may increase dry time and/or rain resistance time.
  • Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
  • On semi-smooth surfaces, use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015 -.021" spray tip, 60 mesh filter). On rough surfaces, use a high quality 3/4-1" nap roller cover.
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
  • On heavy stains and woods that contain tannins, allow 12-16 hours of dry time between coats.
  • Longer dry time required in cooler temperatures and higher humidity.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant. When applying to vinyl, color choice must be the same color or lighter than the existing color.
  • Do not use on floors.

Read More

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Read More

Read More

WARRANTY

Behr Process LLC warrants to the original residential consumer purchaser (“you”) the performance of this product as described on this label for so long as you own and reside in the home, subject to the exceptions outlined below. THIS WARRANTY IS NOT VALID IF THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE AND USED AND CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, subject to the exceptions outlined herein, Behr Process LLC will, at its sole option and upon presentation of proof-of-purchase (i.e., the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. NOTWITHSTANDING ANYTHING IN THE FOREGOING, THIS WARRANTY DOES NOT APPLY TO OR COVER BEHR DYNASTY 10-YEAR COLOR FADE PROTECTION AND RELATED DESCRIPTION ON THIS LABEL. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental, consequential, or punitive damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental, consequential, or punitive damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty

To consult with a Behr Paint Company Representative, call 1-800-854-0133 Ext. 2 (U.S.A. only).

Read More

Reviews

Compare Behr Products

  • STUCCO / MASONRY / BRICK
  • SIDING ( ALUMINUM / FIBER CEMENT / WOOD / WINYL )
  • DOORS / WINDOWS / SHUTTERS
  • GARAGE DOORS / GUTTERS
  • SOFFIT / FASCIA / EAVES

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot