BEHR PREMIUM^® Cabinet, Door & Trim Interior/Exterior Semi-Gloss Enamel No. 7120

Surface Preparation† (Proper Surface Preparation is Required.)

• All surfaces must be clean, sound, dry and free of any dirt, oil and grease stains.
• Remove mildew stains with a mildew stain removing product.

Interior Wood Trim, Doors & Cabinets:

• ​Remove all loose and peeling paint; scuff sand glossy surfaces; caulk and repair imperfections.
• Sand all wood surfaces in the direction of the wood grain to the desired smoothness.
• Remove all dust from sanded surfaces with a damp, lint-free cloth.

Exterior Wood:

• ​Use a product such as BEHR PREMIUM® No. 63 All-In-One Wood Cleaner.
• Thoroughly rinse the treated surfaces with clean water and allow to dry before any paint application.

Interior/Exterior Concrete & Masonry:

• Allow new stucco, plaster and masonry to cure for 30 days.
• Use a concrete & masonry degreaser & cleaner to clean and prepare the surface.
• Powerwash to remove chalk on exterior surfaces.

Interior/Exterior Metal:

• ​Etch galvanized metal. For primed surfaces, sand primer coat prior to topcoating for best results.

Prime

• Priming is recommended over all properly prepared coated or uncoated surfaces.
• For all interior surfaces, use a product such as BEHR® Kitchen, Bath & Trim Interior Stain-Blocking Primer & Sealer No. 75.
• For all exterior surfaces, use a product such as BEHR Multi-Surface Interior/Exterior Stain-Blocking Primer & Sealer No. 436.
• Follow all label instructions.

Application

• DO NOT THIN.
• Stir before and during application.
• When working with more than one can of the same product, intermix to ensure color uniformity.
• Certain colors may require 2 or more coats to achieve complete hide.
• Apply when air temperature is between 50–90° F.
• Brush: Apply a thin coat using a high quality synthetic brush. For best results, apply paint with a high quality 100% Nylon brush.
• Roller: Use a high quality 1/4” nap roller cover.
• Airless Sprayer: .013”–.015” spray tip, 60 mesh filter.
• OPTIONAL: In between coats, sand lightly with 320-400 grit sand paper.
• NOTE: If touch-up is necessary, same application method is recommended.

Dry Time

• Darker colors may require additional dry time. Longer dry time required in cooler temperatures and higher humidity.
• Cabinets, doors and windows can be closed as early as 2 hours after final topcoat.
• After 2 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent. Dry paint film is mildew resistant.
• Do not use on floors

Disposal

• Properly dispose of all soiled rags.
• For disposal of empty containers and unused product, contact your household refuse collection service.
• To reduce waste, consult with your retailer or an online paint calculator to determine the correct amount of paint to purchase.