AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

BEHR PREMIUM® Water-Based Pre Stain Wood Conditioner No. B2080

Avg. Rating:

BEHR PREMIUM Water-Based Pre Stain Wood Conditioner prepares wood surfaces for water-based staining. Along with sanding, this product is a critical step in ensuring even and consistent penetration of the water-based stain. This product is ideal for all wood types and brings you one step closer to beautiful results.

See Our Selection of Interior Water-Based Stains and Finishes

1 quart can of Behr Premium Water Based Pre Stain Wood Conditioner, interior

Technical Data Sheets

Safety Data Sheets

Finish

Clear transparent

Best For Use In

Properly prepared Interior bare or stripped wood surfaces, prior to applying BEHR PREMIUM® Oil-Based Wood Stains.

Coverage

100 Sq. Ft. / Qt.

PRODUCT USAGE
  • Icon of hand sanding surface with sanding block

    Prep
    Before Use

  • Icon of paint brush applying paint

    1 Coat 
    Coverage

  • Icon representing length and width dimensions to determine square footage

    Spread Rate: 
    100 Sq. ft./Qt.

  • Icon of cleaning paint brush under water faucet

    Clean-Up
    Soap & Water

Properly prepared interior bare or stripped wood surfaces prior to applying BEHR® Water-Based Wood Stain.

Preparation

  • Before applying BEHR Premium Pre-Stain Wood Conditioner to bare or stripped wood surfaces, sand wood surfaces (with #180-220 grit sandpaper) in the direction of the grain to the desired smoothness.
  • Remove all dust from the surface with a tack cloth.
  • Note: BEHR Premium Water-Based Pre-Stain Wood Conditioner is not recommended for use with oil-based stains.
  • For oil-based stains, pretreat wood with BEHR Premium Oil-Based Pre-Stain Wood Conditioner.

Read More

Application

  • Stir thoroughly before using. Do not shake or thin.
  • Use a nylon or nylon/polyester brush or a saturated clean cloth and apply liberally to all areas of the wood surface including edges.
  • Allow to penetrate between 5-10 minutes, and then wipe off any noticeable excess with a clean, dry cloth.
  • Apply BEHR Premium Water-Based Wood Stain or BEHR Premium Water-Based Stain & Poly In One. Follow all label instructions.
  • Allow Pre-Stain to dry for up to 20 minutes before applying Wood Stain.
  • Sand lightly prior to staining to remove grain raise.

Read More

Dry Time

  • Dries in 20 minutes.

Read More

Disposal

For disposal of empty containers and unused product, contact your household refuse collection service.

Read More

Read More

WARRANTY

For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. In the event this product proves to be defective within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Reviews

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
Compare
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot