BEHR^® Multi-Purpose Siliconized Acrylic Caulk No. BC10

Where to UseBlank space if empty.

It adheres to common building materials such as drywall, plaster, concrete, stucco, masonry, brick, fiber cement, wood, composites, metal, vinyl, stone and painted surfaces. Not intended for below-grade or water immersion applications.

Blank space if empty.

Surface PreparationBlank space if empty.

All surfaces must be clean and free of dust, chalk, oil, grease, wax, polish, mold and mildew stains, rust, loose material and all other foreign substances.

ApplicationBlank space if empty.

• Apply with conventional hand or air-powered caulking equipment in a continuous operation with adequate pressure to fill the joint to the proper width and depth (do not overfill the joint).
• Apply when air, material and surface temperatures are between 40°F and 90°F.
• Do not apply if rain or freezing conditions are expected within 24 hours.
• Cut the tip at a 45° angle to desired bead size.
• Gun caulk into void to provide a solid fill.
• Use backer rod for gaps larger than 1/2" x 1/2".
• Smooth using a dry tool or a slightly wet spatula if necessary.

Clean-Up & DisposalBlank space if empty.

• Clean tools, equipment and excess uncured material with soap and water immediately after use.
• For disposal of empty containers, unused product and soiled rags, contact your household refuse collection service.

Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. THIS WARRANTY EXCLUDES WATER INTRUSION DUE TO STRUCTURAL DEFECTS AND/OR CAULK AND SEALANT FAILURE. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.