White house exterior with a can of Behr Ultra Exterior Satin Enamel in foreground White house exterior with a can of Behr Ultra Exterior Satin Enamel in foreground Mobile
BEHR ULTRA® Exterior Paints

Paint, prime and protect with BEHR ULTRA Exterior

Buy Now

Features

  • Stain-Blocking Paint and Primer◊
  • Excellent Durability & Hide in Fewer Coats
  • Stain & Dirt Resistant
  • Low Temperature Application
  • Enhanced Mildew Resistant Finish
  • Guards against Damage from Sunlight & Moisture
◊A primer coat may be needed on some surfaces. See label for details.
BEHR ULTRA® EXTERIOR PAINTS ARE RATED

BY CONSUMER REPORTS

View Report

Consumer Reports does not endorse products or services.

Consumer Reports Ultra Exterior Paint report Consumer Reports Ultra Exterior Paint report image for mobile
Why Choose BEHR ULTRA Exterior Paint?

Because you get it all: Versatile paint and primer◊ in a single coating that provides excellent durability and resistance to stains and mildew. It’s never been easier to transform and protect your home.

◊A primer coat may be needed on some surfaces.  See back label for details.

Excellent Durability

The tighter, denser paint film guards against damage from sunlight and moisture.

Stain & Dirt Resistant

Formulated to resist both dirt and water, preventing stains from settling into the paint film.

Low Temperature Application

A tough paint film protects from the elements and can be applied in cold climates as low as 35°F.

  • PRODUCT USAGE AND APPLICATION INSTRUCTIONS

    PRODUCT USAGE

    • Clock icon

      1 HR Dry Time 
      2 HR Recoat Time

    • Paint coverage icon.

      250-400 Sq. Ft 
      Coverage per Gallon

    • Soap and water cleaning a paint brush icon

      Soap & Water
      Clean-Up

    • Thermometer Icon

      Protect
      from Freezing

    Properly prepared and cleaned coated or uncoated exterior surfaces. Ideal for Wood, Vinyl, Aluminum, Fiber Cement Siding, Metals, Brick, Masonry, Stucco, Steel, and Fences.

    Preparation & Prime†

    • Countersink nailheads, fill and sand smooth. Remove rust, loose or peeling paint. Repair imperfections and sand smooth.
    • Wash off dirt, grease and chalk with detergent and/or powerwash. Remove mildew stains with a mildew stain removing product.
    • Clean and sand new or weathered wood. Scuff sand or degloss smooth or glossy surfaces.
    • Scuff sand or etch metals. Rinse and allow to dry.
    • Caulk windows, doors and other openings. Allow new stucco, plaster and masonry to cure for 30 days before painting.
    • Use BEHR ULTRA™ paint as a primer for repaired or uncoated surfaces, including woods that contain tannins (two primer coats required for redwood and cedar) and heavily stained areas.
    • Lock in stains with the first primer coat; if necessary, apply a second primer coat of BEHR ULTRA.
    • For drastic color changes or when applying deep colors denoted with a dagger (†) on the color chip, apply a tinted primer coat of BEHR ULTRA if needed.

    Read More

    Application

    • Apply product on dry substrates when air and surface temperatures are between 35°-90°F (2°-32°C) and will remain between 35°-90°F (2°-32°C) for at least 4 hours after applying.
    • Do not paint when rain or heavy condensation is expected.
    • Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
    • On semi-smooth surfaces, use a high quality 3/8-1/2” nap roller cover, nylon/polyester brush or an airless sprayer (.015-.021” spray tip, 60 mesh filter).
    • On rough surfaces, use a high quality 3/4-1” nap roller cover.
    • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
    • Certain colors may require more than one coat for complete hide.
    • On heavy stains and woods that contain tannins, allow 12-16 hours of dry time between coats. Cooler temperatures or higher humidity may prolong drying time.
    • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
    • Dry paint film is mildew resistant.
    • When applying to vinyl, color choice must be the same color or lighter than the existing color. Do not use on floors.

    Read More

    Disposal

    • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

    Read More

    Visit behr.com for painting tips, expert project advice and the perfect color coordination with ColorSmart by BEHR®.

    empty-paragraph

    Read More

    Read More

  • MSDS & DATA SHEET
  • WARRANTY
    WARRANTY

    Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey:  The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

  • PRODUCT USAGE AND APPLICATION INSTRUCTIONS
  • MSDS & DATA SHEET
  • WARRANTY
PRODUCT USAGE
  • Clock icon

    1 HR Dry Time 
    2 HR Recoat Time

  • Paint coverage icon.

    250-400 Sq. Ft 
    Coverage per Gallon

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

  • Thermometer Icon

    Protect
    from Freezing

Properly prepared and cleaned coated or uncoated exterior surfaces. Ideal for Wood, Vinyl, Aluminum, Fiber Cement Siding, Metals, Brick, Masonry, Stucco, Steel, and Fences.

Preparation & Prime†

  • Countersink nailheads, fill and sand smooth. Remove rust, loose or peeling paint. Repair imperfections and sand smooth.
  • Wash off dirt, grease and chalk with detergent and/or powerwash. Remove mildew stains with a mildew stain removing product.
  • Clean and sand new or weathered wood. Scuff sand or degloss smooth or glossy surfaces.
  • Scuff sand or etch metals. Rinse and allow to dry.
  • Caulk windows, doors and other openings. Allow new stucco, plaster and masonry to cure for 30 days before painting.
  • Use BEHR ULTRA™ paint as a primer for repaired or uncoated surfaces, including woods that contain tannins (two primer coats required for redwood and cedar) and heavily stained areas.
  • Lock in stains with the first primer coat; if necessary, apply a second primer coat of BEHR ULTRA.
  • For drastic color changes or when applying deep colors denoted with a dagger (†) on the color chip, apply a tinted primer coat of BEHR ULTRA if needed.

Read More

Application

  • Apply product on dry substrates when air and surface temperatures are between 35°-90°F (2°-32°C) and will remain between 35°-90°F (2°-32°C) for at least 4 hours after applying.
  • Do not paint when rain or heavy condensation is expected.
  • Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
  • On semi-smooth surfaces, use a high quality 3/8-1/2” nap roller cover, nylon/polyester brush or an airless sprayer (.015-.021” spray tip, 60 mesh filter).
  • On rough surfaces, use a high quality 3/4-1” nap roller cover.
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
  • Certain colors may require more than one coat for complete hide.
  • On heavy stains and woods that contain tannins, allow 12-16 hours of dry time between coats. Cooler temperatures or higher humidity may prolong drying time.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant.
  • When applying to vinyl, color choice must be the same color or lighter than the existing color. Do not use on floors.

Read More

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Read More

Visit behr.com for painting tips, expert project advice and the perfect color coordination with ColorSmart by BEHR®.

empty-paragraph

Read More

Read More

MSDS & DATA SHEET

1 gal can of Behr Ultra Exterior paint, flat
BEHR ULTRA® Exterior Flat
Ultra Pure White No. 4850 Medium Base No. 4854 Deep Base No. 4853
See Full MSDS, Product Data & Safety
See Full MSDS, Product Data & Safety

MSDS & DATA SHEET

1 gal can of Behr Ultra Exterior paint, satin enamel
BEHR ULTRA® Exterior Satin Enamel
Ultra Pure White No. 9850 Medium Base No. 9854 Deep Base No. 9853
See Full MSDS, Product Data & Safety
See Full MSDS, Product Data & Safety

MSDS & DATA SHEET

1 gal can of Behr Ultra Exterior paint, semi-gloss
BEHR ULTRA® Exterior Semi-Gloss Enamel
Ultra Pure White No. 5850 Medium Base No. 5854 Deep Base No. 5853
See Full MSDS, Product Data & Safety
See Full MSDS, Product Data & Safety
WARRANTY

Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey:  The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Compare Behr Products

  • STARTING PRICE
  • DURABILITY
  • STAIN BLOCKING
  • COVERAGE

*Valid only when tinted to colors from the BEHR DYNASTY® specially curated Exterior Color Fade Protection Palette. Based on predictive lab testing with a color shift less than Delta E of 5 as measured by CieLAB. A primer coat may be needed. Two coats of BEHR DYNASTY® Exterior Paint are recommended for optimal durability. Individual results may vary. See back label instructions for details and warranty limitations.
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
Compare
BLACK
BLACK
What sheen do I need?
How much paint do I need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep and pre-treat wood prior to any stain project.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
Estimated Price
$0.00
The following product(s) is required to properly prep and pre-treat wood prior to any stain project. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when stripping is needed.
Recommended product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
Estimated Price
$0.00
$0.00
Product price is estimated. Pricing could change based on your local Home Depot pricing.
The Home Depot logoSold Exclusively at The Home Depot

Subscribe

Never miss out on the latest news from BEHR.  By creating an account that includes your personal information, you are agreeing to our Privacy Policy.

Please enter email address.
Please use a valid email address.
close x

Never miss out on the best Behr promotions, products and inspiration.

Fields with an asterisk (*) are required. See our privacy policy