BEHR PREMIUM^® Elastomeric Masonry, Stucco & Brick Paint No. 68

Where to UseBlank space if empty.

Properly prepared exterior vertical surfaces such as: Stucco, Masonry, Concrete, Concrete Block or Brick as well as adjacent Wood and Metal surfaces. Not for use on horizontal surfaces subject to foot traffic.

Usage SummaryBlank space if empty.

PreparationBlank space if empty.

• Allow new stucco and masonry to cure for 30 days before painting.
• Remove all loose, peeling paint. Power wash to remove chalk. Remove dirt and grease with a concrete & masonry degreaser & cleaner product.
• Remove mildew stains with a mildew stain removing product.
• On galvanized metal, use a diluted solution of a product such as concrete & masonry cleaner & etcher to prepare the surface. Rinse thoroughly and allow a minimum of 24 hours to dry.
• Cracks and gaps wider than 1/16” (1.5 mm) should be routed open, dusted and patched with an elastomeric patching compound. Use an acrylic caulk around windows, doors and trim. Scuff sand glossy surfaces.
• Prime all uncoated, patched, chalky, wood and/or metal surfaces with a product such as BEHR PREMIUM PLUS® NO. 436 Exterior Multi-Surface Primer & Sealer.

ApplicationBlank space if empty.

• DO NOT THIN.
• Intermix all cans of same product to ensure color uniformity. Stir paint before and occasionally during application.
• Use product when air and surface temperature are 50-90˚F (10-32˚C). Do not use if rain or heavy dew is expected within 24 hours.
• Apply using a high quality 1 1/4” nap roller, nylon/polyester brush or airless sprayer (.025"-.029" spray tip).
• A second coat must be applied at the same spread rate as the first.
• A third coat may be required to achieve a final dry mil thickness of about 10-15 mils.
• If airless spraying, use equipment with a minimum of 2,500 PSI at the tip. Maintain a wet edge to avoid lap marks.
• Do not re-spread or re-work paint.

Dry TimeBlank space if empty.

• Longer dry time required in cooler temperatures and higher humidity.
• After two weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.

DisposalBlank space if empty.

• Properly dispose of all soiled rags and protect unused product from freezing.
• For disposal of empty containers and unused product contact your household refuse collection service.

Behr Process Corporation warrants to you, the original residential consumer purchaser, that this product will provide a waterproof finish and hide hairline cracks existing at the time of original product application for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. THIS WARRANTY EXCLUDES WATER INTRUSION DUE TO STRUCTURAL DEFECTS AND/OR CAULK FAILURE.  Color fading and chalking will occur naturally over time. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.