AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

BEHR® Bonding Primer No. 432

Avg. Rating:

BEHR Interior/Exterior Bonding Primer is specifically formulated to bond to a variety of ‘tough-to-paint’ surfaces. Its advanced chemistry provides a sound anchor for topcoats while reducing or potentially eliminating the need for sanding dense and glossy surfaces. This product may be used under epoxies, lacquers, products containing xylene or other hot solvents, provided it’s allowed to dry for 24 hours before top coating and tested for compatibility in an inconspicuous area before full coat application.

1 gal can of Behr Bonding Primer

Technical Data Sheets

Safety Data Sheets

Finish

Dries to a non-reflective finish that provides a sound anchor for paint.

Best for use in

Interior and Exterior.

Coverage

300-400 Sq. Ft. per Gallon.

PRODUCT USAGE
  • Clock icon

    30 Min Dries to Touch
    1 HR Ready to Topcoat

  • Paint coverage icon.

    300-400 Sq. Ft 
    Coverage per Gallon

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

  • Thermometer Icon

    Protect
    from Freezing

  • Over properly prepared uncoated and previously painted Interior/Exterior surfaces.
  • Ideal for Kynar®, PVC, vinyl, Formica®, glass, tile, glazed brick, fiberglass, chalky paints, glossy finishes, architectural plastics, and metals.
  • If using as a primer for epoxies, lacquers, products containing xylene or other hot solvents, allow to dry for 24 hours before topcoating; test for compatibility in a discrete area first before full coat application.
  • Not recommended for floors or horizontal surfaces subject to prolonged water contact.
  • For dramatic color changes, tint primer with up to 2 fl oz of colorant per gallon.

Preparation

  • All surfaces should be properly prepared and cleaned.
  • While BEHR Bonding Primer is formulated to adhere without sanding, it is recommended that a small area be tested for adhesion prior to beginning the job.
  • Remove loose paint, wash off chalk, dirt, and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain removing product.
  • Remove all dust with a damp cloth, allow to dry.
  • Clean bare metal surfaces in accordance with The Society for Protective Coatings (SSPC) specifications.

Read More

Application

  • Apply when air and surface temperatures are between 50-90°F (10-32°C).
  • Use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015-.021" spray tip, 60 mesh filter).
  • Stir primer occasionally.
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is requried, thin with water at a rate of no more than 1/2 pint per gallon.
  • Topcoat within 14 days.

Read More

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Read More

Read More

WARRANTY

Behr Process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Reviews

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
Compare
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot