AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc
6LeIxAcTAAAAAJcZVRqyHh71UMIEGNQ_MXjiZKhI

Technical Data Sheets

Safety Data Sheets

Product Certifications & Declarations

Finish

< 10 @ 85°

Best for use in

Use on interior and exterior surfaces including drywall, plaster, wood, galvanized, aluminum, architectural plastics, masonry and brick. Not recommended for floors.

Coverage

300 - 400 Sq. Ft. per Gallon depending on the surface texture, porosity and the application method.

PRODUCT USAGE
  • KILZ KLEAR Primer may also be used to seal highly porous surfaces with a transparent flat finish.
  • Suitable for sealing torn drywall facing paper, dried wallcovering adhesive, ‘hot’ joint compounds, concrete and stucco.
  • Use on interior and exterior surfaces including drywall, plaster, wood, galvanized, aluminum, architectural plastics, masonry and brick.
  • Not recommended for floors.

Surface Preparation

The following steps are recommended for product performance.

  • All surfaces must be clean, dry, free of dust, chalk, oil, grease, wax, polish, mold and mildew, loose or peeling paint, rust and all other foreign substances.
  • If washing is necessary, use a non-soapy detergent or a TSP substitute, rinse well and allow to dry.
  • Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface. Sanding or removal of paint containing lead is hazardous*.
  • Glossy Surfaces: Use only over properly prepared glossy surfaces, scuff-sand to de-gloss and wipe clean before application.
  • Mold or Mildew Covered Surfaces: Wash the area with a mildew remover, rinse with water and allow to dry before priming.

Read More

Application

  • Stir thoroughly before and occasionally during use.
  • Use product when the surface and air temperatures are between 50-90°F (10-32°C).
  • Do not thin or apply at a greater spread rate or build up a visual glaze on the surface. The product is formulated for use at package consistency only.
  • Brush – High quality Nylon/Polyester.
  • Roller – High quality 3/8-1/2" nap on smooth surfaces or 1/2-3/4" nap on semi-rough or porous surfaces.
  • Airless spray – .017-.021" tip / 60 mesh filter.
  • Coverage: 300-400 sq. ft. (18.6-27.9 m2) per gallon, depending on the surface texture, porosity and the application method.

Read More

Dry Time at 77°F (25°C), 50% RH

  • To Touch: 30 Minutes
  • To Recoat / Topcoat: 1 Hour
  • Longer dry time required in cooler temperatures and in higher humidity.

Read More

Clean-Up & Disposal

  • Clean equipment and paint spatters with mineral spirits. If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations.
  • Do not dispose of this product down a drain. Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service.
  • To consult with a KILZ Certified Coatings Professional, call 1-866-PRIMER-1 (U.S.A. only).

Read More

Citations/ Limitations

  • IMPORTANT! DO NOT OPEN CAN WITHOUT READING INSTRUCTIONS.
  • DO NOT USE ON FLOORS.
  • DO NOT USE WHEN AIR AND SURFACE TEMPERATURES ARE BELOW 50ºF OR ABOVE 90ºF.
  • SHELF LIFE UNDER NORMAL CONDITIONS IS TWO YEARS UNOPENED.

Read More

Read More

WARRANTY

For one year from the date of purchase, Masterchem Industries LLC warrants to the original residential consumer purchaser (1) that the product meets Masterchem Industries LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. In the event that this product proves to be defective within one year from the date of purchase, Masterchem Industries LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty is not transferable. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. For warranty service, call: 1-866-774-6371, or email: techservice@masterchem.com. Masterchem Industries LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Reviews

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot